xell

Hi, I was attempting to mod my Xbox 360 Trinity using the software RGH3 method but half way into the mod where you supposed to hook up the XBOX to TV and boot into XeLL it just sits there, fan running, and the green LED in the front flashing rapidly. I'm using J-Runner 3.3.0 and clone JR...

First off, I know I'm around 12 years late to the game but oh well... Managed to get a never plugged into the internet Falcon a little while back (5 years ago), me and a buddy decided to try and JTAG it for the lols (only took us 5 years to attempt it). Using a MTX Spi Flasher Managed to pull...

Hello, I recently made myself 2 consoles like in the title via a CPU swap, but there is one thing that's been bugging me since I saw the Xell screen, mainly CPU/GPU voltage. As we know Elpis is basically a GPU Rhea (Late? I mean the earliest Elpis console I saw was from 2009-04-12, one of the...

The bulk of this thread is archive based. It is vastly irrelevant as the JTAG and RGH exploits take full advantage of a console in a much better manner. The sources I used can be found here and here along with here. This is also an extension thread to JoinTheResistance's thread - here (Thanks to...

My brother was messing around with the xbox trying to connect it to the internet. The xbox connected to the internet but then it suddenly shut down. When I try to boot it up, the fans run and the power button turns green but I am not getting any output on the screen. (I tried multiple HDMI...

Hi ladies and gentlemen, Hopefully you might have an answer to this. Using an X360Ace v3, I am able to get the console to boot the xenon xell pretty quickly using the dynamic file, but if I go through the AutoGG and try and build a falcon file, the console will not boot the dashboard. It just...

So I was watching a MrMario video and he was saying that a flashed DVD drive needs to have the original DVD key flashed to a modded firmware. So if this is the case can you not just boot into xell to get your DVD key and flash your DVD drive from there?

Hi People, Question: Could it be that a corrupt NAND causes e79? but still boots Xell just fine? Answer: Yes, after flashing a donor NAND image and unplugging it for 20sec to reset the SMC ram. This Xbox360 came back to life :smile:. (See post #8 for detailed information) Full story: I...

Not too long ago,upgraded my consoles with additional heatsinks, I know it's not professional kit, but here it is What started bothering me, is unusually high,compared to others,GPU temperatures on one of my Falcons Suddenly, after routine turn-off/ turn-on(downloaded few TUs from FSD) the...

Hello, TL;DR I want to revert the recently bought console from RGH to stock purely via Xell, no soldering. Want to know if the path I chose is viable. I recently bought Xbox 360 slim (Corona I think), which was RGH modded previously, using CoolRunner RevB chip. I want to revert it back to...

what options do i have to boot to Xell and retrieve the CPU key on a fat Xbox with an empty nand (original dump not available ) , knowing that Xbox was updated with a very new dash? and then use a donor nand to create a freeboot image with the CPU key retrieved.

Hello who ever is here to save me! So I bought OEM Ace V3 chips, and have started installations for the systems I am trying to RGH (For Personal LAN Center). Two of them have gone perfectly, but the other two not so much. The two troubled ones are both doing similar things. Both systems...

As the title says, there is a problem with my Trinity RGH. I was able to RGH it but it would not boot with the Hitachi DVD Drive plugged in. I have done some research and believe this could be Xell Reloaded (Xenon Linux Loader) or it could be the glitch chip shorting out because of the metal...

Corona v4 4GB NAND with Post fix v2 adapter and SD Tool V2.2 - Alternate C5R11 'D' point due to lifted pad on R4P4 I lost my original NAND and Im trying to boot xell so I can get my CPU key and continue from there to rebuild my NAND. I've borrowed a public cpu key for corona and built a fake...

Hi guys, i've been trying to run Mupen-360 by running on the dash but it failed, so i found out i have to run it from the XELL RELOADED part by using the eject disc button, so it runs, detects my file on the USB (Formatted FAT32) and then just goes black for some seconds and my Screen stops...

Whenever I plug in my USB to any port on the console, it won't pick it up. In xexmenu it doesn't recognize it and in xell. If I have to load a new launch.ini idk how I would do that being since it simply won't pick up my USB. Thank you any help is appreciated.

I was trying to install mupen64 but when I start XELL (booting through eject button), it gets stuck, reading the errors "TFTP: packet send error" and "TFTP: no answer from server"... I currently have mupen64 and xell on an usb. Any idea of what am I doing wrong? Oh and my console is a jtag/rgh...

Is there any way to boot .elf files that require xell without needing them on the root of an external storage device? I would like to have an ubuntu listing in aurora, but I already tried creating a folder with xell and the necessary Linux files on it and it won't boot. Copy that to the root of...

My Trinity was rghed with Ace v3. It boots xell fine then after 20 seconds it red rings. The console will not boot to dashboard but red rings while trying to glitch.

Just recently RGHed my trinity xbox 360. the ace v3 chip glitches and boots into xell, but after 10 seconds or so the console turns off. I have not created the xebuild yet because I am trying to get the cpu key.