What's new

rgh 1.2

  1. Kintler

    Question  Rgh 1.2

    When installing the blue wire on the board I knocked off a few resistors. How ****ed am I?
  2. Kintler

    Question  Rgh 1.2

    When installing the blue wire on the board I knocked off a few resistors. How ****ed am I?
  3. impawake

    Question  Jasper SB RGH 1.2 Very slow boot times

    Hello so yesterday i got a Jasper 16mb nand.I readed the nand and everything went smooth,wrote ecc.Programmed my matrix V1/V3 with the 12_21. So i turned the console on and went and made a sandwich,ate and then after 6-7 minutes the console finally booted xell.Got the cpu key,made...
  4. R

    Question  RGH console can't read the hard drive

    My RGH console can't read or even recognize the (retail 250) hard drive. An intresting thing is, when sometimes it does manage to read the drive and boot into aurora, when I connect an ethernet cable to it, it immediatly stops sending HDMI however the console is still on and the controller...
  5. R

    Solved  Differences between varie RGHs

    What are the differences between RGHs (1, 1.2, 2, s-rgh)? Which one is best? What glitches can you perform on phats? What glitches can you perform on slims? What chips can you use on phats? What chips can you use on slims? Thanks in advance.
  6. R

    Solved  Help with RGH chips compatabilty

    Hello, I have a few questions. What motherboards is ace v3 compatable with? What motherboards is coolrunner rev c compatable with? Are all chips compatable with all (except xenon) motherboards? (For the same motherboard type) Can I use the same timing files (.xsvf) in ace v3 and in coolrunner...
  7. jossrik

    Question  Jasper 16mb jtag maybe problem?

    K, soldered everything, glitched into xell reloaded, copied my cpu key, built the xebuild, wrote it to nand, all that successful. Then it won't boot into the dash or xell. Doing a 1.2 install and still learning. When I copy my original nand I get the 0022 error. On the xebuild nand the...
  8. MilkySharpMan

    Question  Help Me Decide If I Should Stay On Current Dash 9199

    I have 3 Xbox 360s. One Slim Trinity, and 2 Phat Jaspers (one is white. we'll be talking about this one to go along with the title). The black Jasper i put a coolrunner in and did the RGH 1.2 method. Not the best boot times due to my wire routing, but it does work. It was my first chip install...
  9. l3l

    Question  Error upon opening Friends, Party or messages in general.

    Hello Se7enSins, I've been having an issue for the past couple days. Sometimes for no reason, my RGH will make me re-install the 17526 Avatar Update. I decided this time ill install it via USB, and so I did. After completion, my RGH will no longer open Messages, Playercards, Invites or my...
  10. TimelessNL

    Solved  [SOLVED] RGH1.2 - Falcon does boot Xell but not to Dash(e79) (did once though)

    Hi People, Question: Could it be that a corrupt NAND causes e79? but still boots Xell just fine? Answer: Yes, after flashing a donor NAND image and unplugging it for 20sec to reset the SMC ram. This Xbox360 came back to life :smile:. (See post #8 for detailed information) Full story: I...
  11. A

    Question  HDMI issues with RGH'd Falcon

    Hello. I have just recently RGH'd 1.2 5 consoles. 4 are Falcons and 1 is a Jasper all with excellent boot times using Matrix V1 (between 3-10 seconds or less). I got them on a job lot (none of them have RROD and none of them have been modded before or even opened, still had warranty sticker)...
  12. HypeAtHeart

    Question  Rgh 17526, How to?

    I am going to RGH 1.2 my jasper 16mb and when I’m in J Runner and select RGH2 it gives me glitch2m and cr4 underneath. Do I select any of these? And also I didn’t see the newest dash version I see 17511, Do I select that? Is there any other version of J-Runner I could use where it has all the...
  13. A

    Question  Falcon suddenly died, GPU overheat

    Not too long ago,upgraded my consoles with additional heatsinks, I know it's not professional kit, but here it is What started bothering me, is unusually high,compared to others,GPU temperatures on one of my Falcons Suddenly, after routine turn-off/ turn-on(downloaded few TUs from FSD) the...
  14. A

    Question  Matrix Glitcher v1/Jasper 16mb no power, no boot. Boots up if 3.3v is removed

    Hi everyone, I been having some issues lately with this Matrix Glitcher v1. I have soldered everything up correctly using the diagrams from here: https://www.se7ensins.com/forums/threads/rgh-1-2-start-to-finish-tutorial-how-to-get-a-cr4-like-experience-phats-only.1349194/ To get RGH 1.2 on...
  15. A

    Question  Matrix Glitcher RGH 1.2 Jasper problems

    Can someone out there please help me! Anyone got experience with Matrix glitcher v1/v3 for phat. I am doing a Jasper, I used to do RGH Xboxes a lot and haven't done it in a long time. I am trying to RGH 1.2 a Jasper like weekend modder has done. I have a few problems though. I programmed the...
  16. T

    Question  Is my wiring right? Matrix Glitcher V3 RGH1.2 JASPER

    Ok here is my wiring for my Matrix Glitcher V3 for RGH 1.2 to a jasper is this right? also is RGH 2 wiring the same as 1.2? Is the wiring for Matrix Glitcher V1 the same as V3? When I turn on my console with the RST point attached on the bottom of the board it red rings. When I use the RST...
  17. E

    Question  Jasper Cpu input protection diode

    I have a jasper that I fried by enabling the cap on a coolrunner rev c. When I turn it on, it runs for a few seconds and then gets 3 red ring with a secondary code 0022. Most people say the only fix is swapping a different cpu onto the board. I have heard people in another thread (Pulled...
  18. S

    Solved  Error in Jrunner when trying to create xebuild image

    Hello, I am trying to create an Xebuild image for my Jasper 360 on dash 17526, however I am getting an error. Here is the log: I have already taken the CPU key (and all other KV info) off the network. The NAND files are also loaded properly. Does anyone know how to fix this? Thanks in advance!
  19. Mobfather Repair

    Solved  Xenon RGH 1.2

    I am attempting the RGH 1.2 on a Xenon with an Ace V3 and the Xenon dynamic file. I programmed and prepped the V3 and installed the Chip as directed. However the chip is not showing signs of attempting to glitch. The console had 4 bad blocks. When I read the nand and I did write the Xenon.ecc...
  20. TB_xex

    Question  Can someone help me with a MW3 DLC loop

    Can someone help me out with Modern Warfare 3? I've been having issues with the free DLC (Erosion, Aground, and Terminal) download loop. I have tried copying the DLC from my retail to my USB and making sure it's in the correct place through Horizon, then moving it to my correct folder on my RGH...
Top Bottom
Login
Register