What's new
  • Howdy, Guest!

    We have issued a forced password reset on all user accounts, meaning you will not be able to login until this process is complete. Instructions will be displayed when you login with your previous credentials, however if for any reason you do not have access to your associated email address, you will need to contact us at [email protected].

    For more information, please read this Important Announcement

    Thank you for being awesome!

nand dump

  1. T

    Question  Corona V3 NAND dumps don`t match in J-Runner

    Hi I solder on a daily basis, and have 10+ years experience modding consoles. Though I did not have the chance to work on an Xbox 360 before, until now. I have a Corona V3 with 16MB NAND that I am trying to RGH3. Installed postfix adapter. Installed both RGH3 wires needed for the exploit to...
  2. kitamime

    Question  Slim Corona bad NAND flash!!! Help please!!!

    Ok so I've glitched Xbox 360 consoles before been a while but I have. Ok so I got a Xbox 360 S w/Corona board, 16mb and was using Matrix V3 and JR Programmer and using the newest edition of J-Runner. I successfully read and flashed the NAND but it would t get out of Xell so I decided to flash it...
  3. sykonist

    Question  Bricked after NAND Flash

    Hello all, I recently purchased an already modded Xbox 360 S console that was advertised as RGH. I do not actually know the technique involved to mod this console. I have asked the seller but he is hard to get any info out of. It was working fine with 200+ games using Aurora. Dashlaunch had the...
  4. M

    Question  XBOX 360 Slim mod failure (PicoFlasher, No xell)

    Hi All, Much help is needed! I got a slim Xbox 360 which I planned to do the RGH3 on. I got the tutorial, got a Raspberry Pi Pico with the most updated PicoFlasher on and the J-Runner software. I've prepared the board and connected the wires as needed, follow the instructions, and did a Nand...
  5. E

    Question  trinity RGH matrix install gone wrong

    I wanted to rgh my Xbox 360 Slim trinity for cheap. Bought a Matrix Nand flasher (MTX SPI Flasher V1.0) + ACEv5 so i dont have to deal with timing files. The following Steps worked fine: 1. Sodering the Matrix programmer to the mainboard. 2. Reading Nand in 2 identical Reads without major...
  6. P

    Question  Can't read Nand from Trinity after installing x360 ace v5

    Hey guys, I'm new to some of the electrical skills required for x360 modding, but I was able to read Nands off of my trinity using JR Programmer v2 the first time I tried to. Now, after installing the x360 ace v5 chip, I'm getting the classic "flash config 0x00000000 can not continue" when...
  7. Phelix_Wolf

    Solved  Nand dump Xbox 360 E

    I plan to dump the nand of my Xbox 360 E and was wondering what the best method for doing this was. All I want to do is dump the nand and be able to "reinstall?" the nand to the Xbox later on. I would also like to be able to make changes to the nand file. However, this is not a necessary...
  8. MilkySharpMan

    Question  Looking for J-Runner help. Not my first Rodeo, but this is giving me a really rough time.

    I've tried everything I know and have seen online to fix the issues I'm having with my Jasper BB 256mb and not being able to read the NAND. Can someone, well versed in J-Runner errors and NAND dumping, help me out here? I will post my next log file in comments if needed. I posted on some...
  9. A

    Question  Wont work after nand dump

    Anyway, so, I've opened my console and stuff, soldered in jr-programmer's wires and dumped the nand. After that I cannot access my console again. In advance: 1) Heat sinks was removed during nand reading. 2) Soldering was good 3) Lights were flashing on jr-programmer when its disconnected from...
  10. FirezRVG

    Solved  [Help] I only have the hacked nand dump.

    As the title says, I only have the hacked nand dump and lost the files from before RGH'ing. I still have my Xbox 360 functioning so I can get my original KV.bin and CPUKey.bin file . Will the hacked nand file work instead of using a Original Nand Dump incase I accidently brick my console? In...
  11. M

    Solved  Cant Complete NAND Image XeBuild/JRunner

    Hey I just got a rgh (trinity) about a week ago and I realized that I wasn't on the latest dashboard and tried to update it. Im currently on 17511 and I dumped my NAND following a video on how to update your dashboard on an rgh and when I got into XeBuild i got this error. **** could not read...
  12. G

    Solved  Dumping nand with arduino ?

    Hello everyone, today i'me here to ask two simple questions : Is it possible to dump the xbox 360 nand with an arduino ? If yes, How to do it ? soldering is not a problem, i have the necessary soldering skills :) My JR Programmer is cominc between October and November (Yeah, it come from...
  13. I

    Solved  Trinity RGH Xbox 360 slim

    Hello, this is my first post so I might not be the best BUT I’ve started a project trying to rgh a trinity motherboard with an ace v3 glitch chip and an lpt connector (for reading nand and other tasks that require computer connection). For some reason when I try to create my nand dumps, my Xbox...
  14. M

    Solved  So... I did a dumb thing

    Ok, so lets begin this off. Late last night I was excited since I finished all my soldering for my cr4 and my jr programmer. It read the nand fine wrote the ecc fine then I booted it up and nothing. I realized my qsb was on nothing but here's the dumb part i clicked write ecc again but I think I...
  15. biomechatronics

    Solved  Jasper 256mb rgh 1.2 matrix glitcher + mtx spi Black screen not booting

    Hi guys maybe i am the most unfortunate person in the world:cry: but i have tryed literaly everything in my x360 and i learned so much during the entire procedure.I mistackely broke the ppl resistor and changet :sneaky:it i tried from 1 to 21 timings but same every time i boot my xbox there is...
  16. J

    Question  Totally Destroyed J1D2 points, Need alternative Solder Points for dumping nand on Xenon

    So After a week or so of Soldering and unsoldering, Due to Matrix not reading my nand. I messed up the J1D2 points. (I'm thinking my Matrix was defective from the get go, given that it basically fell apart.) Id still Like to mess with it though, So im looking for alternative points to solder...
  17. TimelessNL

    Solved  Xbox 360 RGH1.2 - Falcon Motherboard not booting

    Hi, I'm currently facing a problem with one of my Falcon's, It's my 2nd RGH1.2 using the X260Ace_v3 chips. The Xbox runs dash 13599 and should be RGH1'able but since the Acev3 chips are cheaper than a clone Coolrunner I figured that it would be a great alternative to apply a RGHv1.2 instead...
  18. T

    Solved  I Broke it, Whoops

    So, i was in the process of modding an old xbox 360 slim i had laying around. Was working through it fine with the help of a couple of people on this site. I ran the first nand fine and then when i ran the second jrunner crashed, and crashed the PC i was working on too. I booted up and tried...
  19. T

    Solved  RGH Jasper BAD NAND Blocks

    I need help fixing my RGH Jasper I found a bad block and I dont know how to fix it, can anyone please help me.
  20. R

    Solved  Cant read or write to the nand after I wrote xell to nand

    So I wrote xell to the nand and it boots on my Xbox. I turned off my PC to go to bed and went to continue in the morning and I now can't read/ write to the NAND. I have the CPU key and have created the xebuild image. I just can't write it.. Any ideas?
Top Bottom
Login
Register