What's new

Search results for query: *

  1. T

    Question  Copy video & music files from usb to hdd failed RGH

    I have tried to copy video & music files from usb to the internal hard drive using xexmenu & freestyle dash both fail after copying a few files always. I had no trouble copying games from the same usb beforehand and afterwards I don't get it could someone point me in the right direction please!
  2. T

    Question Is my wiring right? Matrix Glitcher V3 RGH1.2 JASPER

    I took out the crystal chip and reconnected the CLK but no luck.. it just tries to glitch for 10seconds and then turn off..
  3. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    Thanks guys I got it to boot once with the CLK Desoldered but, it never wanted to boot again.. I can get the console to stay on for 7 seconds max the first time 3 seconds for the second and it wont power on at all on the third try. If I wait a day. it will start again at 7 seconds and go down...
  4. T

    Question Is my wiring right? Matrix Glitcher V3 RGH1.2 JASPER

    Thanks guys I got it to boot once with the CLK Desoldered but, it never wanted to boot again.. I can get the console to stay on for 7 seconds max the first time 3 seconds for the second and it wont power on at all on the third try. If I wait a day. it will start again at 7 seconds and go down...
  5. T

    Question  Is my wiring right? Matrix Glitcher V3 RGH1.2 JASPER

    Ok here is my wiring for my Matrix Glitcher V3 for RGH 1.2 to a jasper is this right? also is RGH 2 wiring the same as 1.2? Is the wiring for Matrix Glitcher V1 the same as V3? When I turn on my console with the RST point attached on the bottom of the board it red rings. When I use the RST...
  6. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    Ok here is my wiring for my Matrix Glitcher V3 for RGH 1.2 to a jasper is this right? also is RGH 2 wiring the same as 1.2? Is the wiring for Matrix Glitcher V1 the same as V3? When I turn on my console with the RST point attached on the bottom of the board it red rings. When I use the RST...
  7. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    Ok So the Console will boot with the CLK off, RST on, PLL on and the console will boot with the CLK on,POST on, RST off, PLL off. I am confused ill resolder the RST and PLL my favorite ones haha hopefully some genius may understand whats going on..
  8. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    I started unsoldering the wires one by one and turning on the xbox finally after disconnecting the CLK wire from the alternative solder point on the back of the board it turned on and booted the dashboard! I dont know why im so excited but i was pretty stoked! haha.. does anyone recommend this...
  9. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    Hey I wrote the original nand to the console disconnected the matrix glitcher v3 and the console light finally turns on and spins the dvd drive but after 15 seconds it gets a 3 light rrod im guessing thats not from the nand am I right? This console has had a history of rrod's. By the way this...
  10. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    I had it towards XSVF for writing my timing file to the matrix glitcher yes oh sweet as. I am writing the original nand dump right now but I had to remove the ground wire on the matrix and the blue light on the matrix was still on just really dim and it wouldn't write the nand so i took off the...
  11. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    Cheers just wanted to double check are my switches the right way around for writing the nand?
  12. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    Oh so to clarify if dumps were read before writing the ECC. Writing the ECC wouldn't have edited nanddump1.bin files that were saved beforehand?
  13. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    Oh sweet haha, Ok so I have the 2 nand's that it read will it still be the original even after the ecc was created and writen? Thanks so much for the help by the way!
  14. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    Hmm, Could possibly be the matrix glitcher ports. its rosin flux, I thought that was flux lol what kind of flux do you recommend?
  15. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    Cheers, I'm confused though if it was bridged wouldn't the nand read and ecc write have errors? I looked really closely and none of the wires looked bridged to the n***d eye but I could try it. I did use rosin soldering flux but the points for the jr programmer didn't conduct very well with the...
  16. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    Thanks its working now :)
  17. T

    Solved HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    Oh? I tried to link them to public Facebook photo's.. I don't think I have privileges to send a link yet because I haven't posted 10 times yet. whats the best way to link pictures here? Sorry I should have made my post more simple. Thanks for reading it. No my console doesn't turn on at all...
  18. T

    Solved  HELP FALCON & JASPER MAXTRIX RGH 1.2 WONT BOOT

    Hey all, I really got stuck here. I’ve been working on this for days and I finally gave in but I really really want to successfully RGH A console I have been repairing and modding consoles for awhile now and never had any problems with soldering boards. I first attempted the jasper but didn’t...
Top Bottom
Login
Register