T
T3H FunK
Newbie
I'd like to install a DVD drive into my jtagged xenon, because it was sold without one. How would I go about installing a new disk drive? Thanks.
You need to get your cpu key from xell. Get your nand open it with the cpu key and get the dvd key. From there you could spoof a drive to it with JungleFlasher or if you have a dvd drive you know the dvd key for already you could patch the KV with the dvd key and OSIG from it.
OK, few questions.
First, how do you install Xell?
Second, does it have to be the same drive I spoof it to? (it was supposedly a Hitachi).
Third, wut is an OSIG?
Thanks in advance.
Correct me if I'm wrong (which I probably will be) but doesn't xell run when you power on the 360 using the drive's eject button. See, I pressed that on the mobo and the normal dashboard came up.XeLL should already be installed. It doesn't have to be the same drive. An OSIG is the specific type and model of the DVD Drive.
Xell won't boot because u have to hav a DVD drive connected connect any drive up and boot from eject and xell will load the get your keys and do what they said above
I have an extra DVD Drive. Its already flashed. I can give you the DVD Key and everything if you need. AIM me: Allesoccer00
He could patch the KV and reflash his jtag with the dvd key and drive information of that drive.The DVD Key is Mobo unique, he would need the key from his Mobo, not the one used on yours
He could patch the KV and reflash his jtag with the dvd key and drive information of that drive.