EyeDuDab
Banned
The job i currently am working with is ps4, but i labled it as all because its not console dependent.
I was attempting to use the new dart board provided in the arcade while inside a race, but No dpad on the dartboard, but nonetheless, when you spawn into the interior using the trigger provided. not sure if the drop through the floor method will work, but worth a shot to avoid needing the job trigger (friends can breach the same lobby if you "floor breach" or "you both leave the playlist" method)
I noticed that when back in freemode, your now in the default arcade if you use the trigger job tp, or if you back out on vehicle selection. More testing needs done here, thats why im sharing
If you own an arcade setup past the point you see your games, you will see the above floor when you walk through the fortune teller hallway back upstairs. If not, the upstairs wont load the walls. But you can still walk or drive there. If you play with a frind that owns it, but you dont... you will see their interior upstairs. You need to own your own and setup past the point you see games upstairs to be more useful in glitches.
If you use the job tp, ect to get into the default arcade, then they see you, but you cant see them. You have weapons inside. They are invincible inside
First off, the Trigger is NOT INSIDE of the Arcade. It is ABOVE
Ill upload freemode footage of inside the default arcade if needed later...
Video of playing the job
Steps To make the job:
Image of race Invite Players - Lobby Screen
Image of race completed (use destroy last place to finish the job so a friend can bookmark it )
I was attempting to use the new dart board provided in the arcade while inside a race, but No dpad on the dartboard, but nonetheless, when you spawn into the interior using the trigger provided. not sure if the drop through the floor method will work, but worth a shot to avoid needing the job trigger (friends can breach the same lobby if you "floor breach" or "you both leave the playlist" method)
I noticed that when back in freemode, your now in the default arcade if you use the trigger job tp, or if you back out on vehicle selection. More testing needs done here, thats why im sharing
If you own an arcade setup past the point you see your games, you will see the above floor when you walk through the fortune teller hallway back upstairs. If not, the upstairs wont load the walls. But you can still walk or drive there. If you play with a frind that owns it, but you dont... you will see their interior upstairs. You need to own your own and setup past the point you see games upstairs to be more useful in glitches.
If you use the job tp, ect to get into the default arcade, then they see you, but you cant see them. You have weapons inside. They are invincible inside
First off, the Trigger is NOT INSIDE of the Arcade. It is ABOVE
Ill upload freemode footage of inside the default arcade if needed later...
Video of playing the job
Steps To make the job:
- the trigger can be placed ontop of the map if the grid is placed strategically high enough. But you wont be able to exploit the fast job travel if you place the trigger ontop of the map. The race will still be valid tho
- (POINT TO POINT GTA RACE)
- Locate the interior underneath the map near noose in Palomino Heights. (Z: -51) --
- Go under the map using any method you like and set a large flat prop at roughly X: 2677, Y: 401, Z: -51. This is just to visually see your low points and to adjust any further fine tuning later.
- Now place a second large prop directly above it with same gps, but set Height at Z: +0.5 OR MORE. [This is the height to adjust for trigger and lobby camera placement. Set height higher if your lobby camera is too far when taking pics from above the map) ...i personally flew the camera underneath the map
- Use swap props to get back under to the top placed prop. Then place your Trigger in the exact X,Y ontop of this propthat you want to breach into the basement. [Save right now in case you missed your mark, i'll explain later)
- While still there, place your starting grid in the exact same place as your trigger. Then place the remaining checkpoints ontop of the map
- DONT SAVE YET
- Use prop swap to EDIT THE TOP FLAT PROP. -RELOCATE IT ANYWHERE AWAY FROM THE AREA [I placed randomly on top of the map]
- TEST.
- --if you spawn in the arcade, good. --If you fall then breach, good. Anything else, go back and edit the starting grid to hit your desired location. [This is why i said dont save yet. You can reload from the last spot to adjust with your prop placed back into position.]
- If you hit your mark, you cant leave the room to complete the test. So now we need to build a breach out of the arcade for testing purposes.
- SAVE THE JOB
- Go back under and locate your starting grid. Place a flat prop near it so you can see below the grid as well.
- Pick large ramp, or be creative
- Place the prop below the grid, but slightly in front. Then set height to adjust for falling distance. I placed my ramp with its base on the ceiling of the arcade.
- TEST. if you still breach inside during testing, good
- Goto race details and pick any vehicle that you think will hit that ramp to AVOID LANDING IN THE ARCADE. i chose bmx.
- Adjust this ramp and your vehicles to avoid the interior and hit the ramp during testing. This is your only hope to publishing a valid race, so pay attention to details and placement. It too me many race respawns and failded attempts to hit the ramp i placed without obstructing my starting grid within the race.
- --If you successfully avoided the interior during the last test, good. --if you still spawn inside the interior during testing without trying to hit the ramp, GOOD ...if not, adjust the ramp
- Set your vehicles back to whatever you like now, as long as you don't need to re-test the job
- Now you can Publish
Image of race Invite Players - Lobby Screen
Image of race completed (use destroy last place to finish the job so a friend can bookmark it )
Last edited: