Cali
Retired
Retired
First things first, make sure your device is compatible.
Note: Sorry if screenshots below are gigantic, I took the screenshot directly from my phone and didn't resize.
Compatible Devices
If your device is compatible follow the steps below and you'll be good to go in a few minutes
Head to Safari on your Apple device and go to https://www.tweakboxapp.com/ and click "Install Now."
Now make sure you click "allow" on the next screen that pops up
After you click allow it should say Profile Downloaded, Review the profile in the settings app if you want to install it. So now go ahead and head to your settings and you should see Profile downloaded on top. Go ahead and click that then you'll be brought to another screen where you have to install the profile.
Go ahead and click install in the top right and finish installing Tweakbox.
Now open the new tweakbox application that's on your home screen and click "apps" and head to "tweakbox apps" and look for unc0ver
Click on unc0ver Jailbreak and click the install button and then click install again if asked. You'll now have an unc0ver application on your home screen, but before you're able to open it, you'll need to verify it through settings. Simply open Settings, click general and scroll down to Profiles and Device management. You should see something along the lines of Zhuhai Hengqin Bright Scholar (could change if their certificate is revoked) go ahead and click that and click Trust.
After verifying your application, go ahead and open Unc0ver and click jailbreak
When running the jailbreak for the first time, it might stop at 10/31 and say Notice: The system snapshot has been successfully renamed, The device will now be restarted. Simply click ok and rerun the jailbreak. This might happen two to three times, but that's apart of the jailbreak process. (I was unable to get a screenshot because I already jailbroke my device so this won't pop up again for me). After running it two to three times, you should see Jailbreak Completed.
I left out some screenshots for the sake of time, but if you can't figure it out or you run into any problems, post down below, and I'll try my best to help.
Note: Sorry if screenshots below are gigantic, I took the screenshot directly from my phone and didn't resize.
Compatible Devices
iPhone 5s
iPhone 6
iPhone 6 Plus
iPhone 6s
iPhone 6s Plus
iPhone 7
iPhone 7 Plus
iPhone SE
iPhone 8
iPhone 8 Plus
iPhone X
iPad Air
6th gen iPad
iPhone 6
iPhone 6 Plus
iPhone 6s
iPhone 6s Plus
iPhone 7
iPhone 7 Plus
iPhone SE
iPhone 8
iPhone 8 Plus
iPhone X
iPad Air
6th gen iPad
If your device is compatible follow the steps below and you'll be good to go in a few minutes
Head to Safari on your Apple device and go to https://www.tweakboxapp.com/ and click "Install Now."
Now make sure you click "allow" on the next screen that pops up
After you click allow it should say Profile Downloaded, Review the profile in the settings app if you want to install it. So now go ahead and head to your settings and you should see Profile downloaded on top. Go ahead and click that then you'll be brought to another screen where you have to install the profile.
Go ahead and click install in the top right and finish installing Tweakbox.
Now open the new tweakbox application that's on your home screen and click "apps" and head to "tweakbox apps" and look for unc0ver
Click on unc0ver Jailbreak and click the install button and then click install again if asked. You'll now have an unc0ver application on your home screen, but before you're able to open it, you'll need to verify it through settings. Simply open Settings, click general and scroll down to Profiles and Device management. You should see something along the lines of Zhuhai Hengqin Bright Scholar (could change if their certificate is revoked) go ahead and click that and click Trust.
After verifying your application, go ahead and open Unc0ver and click jailbreak
When running the jailbreak for the first time, it might stop at 10/31 and say Notice: The system snapshot has been successfully renamed, The device will now be restarted. Simply click ok and rerun the jailbreak. This might happen two to three times, but that's apart of the jailbreak process. (I was unable to get a screenshot because I already jailbroke my device so this won't pop up again for me). After running it two to three times, you should see Jailbreak Completed.
I left out some screenshots for the sake of time, but if you can't figure it out or you run into any problems, post down below, and I'll try my best to help.