Bazatree
Here we go again...
Hello!
UPDATE. The problem is solved, here is the solution.
I had Xbox 360 console with a broken C5R11 pad. The console didn't boot. No worries, it is possible to fix it by making a simple bridge.
All you have to do is to connect C5R11 (end point) to FT4R2 and it will work. You have to heat that end point quite long to make it solder with the wire. Others suggest to scratch it a bit with a needle and then solder. Here is my setup "FT4R2 to C5R11"
Then you can solder point D (Ace Chip) to R4D4 (left side, where is the hole). RGH 1.2 will work great.
Cheers!
UPDATE. The problem is solved, here is the solution.
I had Xbox 360 console with a broken C5R11 pad. The console didn't boot. No worries, it is possible to fix it by making a simple bridge.
All you have to do is to connect C5R11 (end point) to FT4R2 and it will work. You have to heat that end point quite long to make it solder with the wire. Others suggest to scratch it a bit with a needle and then solder. Here is my setup "FT4R2 to C5R11"
Then you can solder point D (Ace Chip) to R4D4 (left side, where is the hole). RGH 1.2 will work great.
Cheers!
Last edited: