What's new

Solved X360ACE V3 wont boot

P

PsYcHLT

Newbie
Messages
48
Reaction score
0
Points
45
Sin$
7
Hello guys, hope you could help me. So trying to RGH my XBOX, did everything follow this TUT (https://www.se7ensins.com/forums/th...get-a-cr4-like-experience-phats-only.1349194/) ,everything went well until step where I should get CPU key, console wont boot. x360ACE chip is blinking green, but wont boot, tried few .xsvf files, also dynamic one, but it just wont boot. Adding photos with my wiring and soldering.
 
Killjoy666

Killjoy666

Getting There
Messages
1,649
Reaction score
233
Points
190
Sin$
0
Hello guys, hope you could help me. So trying to RGH my XBOX, did everything follow this TUT (https://www.se7ensins.com/forums/th...get-a-cr4-like-experience-phats-only.1349194/) ,everything went well until step where I should get CPU key, console wont boot. x360ACE chip is blinking green, but wont boot, tried few .xsvf files, also dynamic one, but it just wont boot. Adding photos with my wiring and soldering.
Motherboard Model?

Also Need To Trim Those Wires.
 
Motherboard Model?

Also Need To Trim Those Wires.

Also By The Way You Need To Update Dashboard For Rgh 1.2 To Work.

You Can Get a Coolrunner Rev C And Rgh1 It.
 
P

PsYcHLT

Newbie
Messages
48
Reaction score
0
Points
45
Sin$
7
Motherboard Model?

Also Need To Trim Those Wires.
 


Also By The Way You Need To Update Dashboard For Rgh 1.2 To Work.

You Can Get a Coolrunner Rev C And Rgh1 It.
It`s Jasper, you wanted to know this model?
There is a problem with updating dashboard, as when I try to update dashboard, xbox gets me some error that cd rom is not proper for updating dashboard (it was changed from some local dealer). Is it possible to update dashboard with J-runner maybe?
 
Killjoy666

Killjoy666

Getting There
Messages
1,649
Reaction score
233
Points
190
Sin$
0
It`s Jasper, you wanted to know this model?
There is a problem with updating dashboard, as when I try to update dashboard, xbox gets me some error that cd rom is not proper for updating dashboard (it was changed from some local dealer). Is it possible to update dashboard with J-runner maybe?
You Can Simply Put A Lite On Drive From Any Phat Console And Update.

But As Said I Would Suggest Buying A Coolrunner Rev C And Just Doing Rgh1 On It.
 
P

PsYcHLT

Newbie
Messages
48
Reaction score
0
Points
45
Sin$
7
Problem is that I don`t have any spare DVD drives or xbox :smile:
Ok, so what is the difference between RGH 1.2 and RGH1?
Just ordered Coolrunner REV C from China, so now have 1month spare time to play with x360ace :biggrin: If any ideas guys, do not hestitate to say :smile:
Also, do I need to update my dashboard for RGH1?
 
Last edited:
Killjoy666

Killjoy666

Getting There
Messages
1,649
Reaction score
233
Points
190
Sin$
0
I have already removed everything, only x360ACE left. I think you can see this in photos
If You Were In USA Should Of Tried eBay Or The Weekend Modder For The Chip.

And No There’s No Need To Update Dashboard.

The Issue I Gotta Say On Your Install There’s To Much Bare Wire. You Gotta Trim It. Secondly It’s The Dashboard. Currently Running Rgh1 Ecc Not Glitch2 One.
 
rynax

rynax

Enthusiast
Messages
178
Solutions
1
Reaction score
13
Points
80
Sin$
7
RGH1.2 on phat is still sensitive to wire routing and length.

Check the example good routing in the tutorial
In the spoilers below you'll find 15432's examples of good wiring.
And a few personal photos

look at your wiring
https://ibb.co/gvcfjT
the wires needs to be shorter and the yellow wire should be away from the fan power connector

A lot of times for me strong interference makes it won't boot, and change the routing always worked

But since there's patch and hack for the ace v3 to be used on phat for RGH1.2, I haven't used it before, I always use matrix glitcher for RGH1.2 phat
 
P

PsYcHLT

Newbie
Messages
48
Reaction score
0
Points
45
Sin$
7
RGH1.2 on phat is still sensitive to wire routing and length.

Check the example good routing in the tutorial
In the spoilers below you'll find 15432's examples of good wiring.
And a few personal photos

look at your wiring
https://ibb.co/gvcfjT
the wires needs to be shorter and the yellow wire should be away from the fan power connector

A lot of times for me strong interference makes it won't boot, and change the routing always worked

But since there's patch and hack for the ace v3 to be used on phat for RGH1.2, I haven't used it before, I always use matrix glitcher for RGH1.2 phat
Yeah, saw that example in tut which I followed, but thought it doesnt really mind so much, it`s gonna boot but like 2sec longer or whatever. Going to buy 22k ressistor now, and some small cables, and will try to rewire
 
P

PsYcHLT

Newbie
Messages
48
Reaction score
0
Points
45
Sin$
7
So made rewiring, attaching photos, also, have damaged my finger and one of the traces, buth of us (XBOX and me) are alive :smile:, so have soldered the cable directly to this trace. XBOX wont boot anyways. I think I will wait for my coolrunner REV C and will try to do RGH1. But now the questions is, if i need to repair that trace to its point FT6U1 or I can leave it as it is? There are no short, have checked already. Also, checked that coolrunner will use different soldering points.

 
Newsk

Newsk

Contributor
Messages
2,602
Solutions
5
Reaction score
348
Points
350
Sin$
7
You either need to update the dash for glitch2 (rgh1.2) or get a rev c/ matrix chip and swap the post for rgh 1 . There was no point in trying different wire lengths/routes until u decide what to do. Now that ft6u1 is burnt just swap post and wait for chip
 
P

PsYcHLT

Newbie
Messages
48
Reaction score
0
Points
45
Sin$
7
You either need to update the dash for glitch2 (rgh1.2) or get a rev c/ matrix chip and swap the post for rgh 1 . There was no point in trying different wire lengths/routes until u decide what to do. Now that ft6u1 is burnt just swap post and wait for chip
Looks like I have nothing to choose, but wait for my coolrunner. So I shouldn't care about that burned wire? Just leave it as it is?
 
P

PsYcHLT

Newbie
Messages
48
Reaction score
0
Points
45
Sin$
7
hello guys again, took some time to get my coolrunner rev C, but it`s already on my desk, so immediatelly trying to place it on my xbox, and now the question is, when I have written ECC to my xbox, how to write original one back? Is it even needed?
 
P

PsYcHLT

Newbie
Messages
48
Reaction score
0
Points
45
Sin$
7
Allright, so soldered coolrunner, and guess what? Nothing, it wont boot. Greed led flashes once and it reboots. This time did soldering very carefuly, thinking maybe my xbox is bricked already. Thinking about dumping original nand back. Can I try to start the console with coolrunner soldered but only 3.3v cable removed? Or I need to remove everything?
 
rynax

rynax

Enthusiast
Messages
178
Solutions
1
Reaction score
13
Points
80
Sin$
7
Just discinnect 3.3V is good to boot stock nand.

It will be either boots fine or RROD. If RROD you can get the secondary error code so you know whats the problem
 
Top Bottom
Login
Register