What's new

Solved i ripped my nand point out of my motherboard while trying to rgh the xbox 360, help!!!!

I

ilovemoddddssss

Newbie
Messages
6
Reaction score
0
Points
20
Sin$
0
hey guys! i was gonna rgh my xbox 360 and was doing the first step, reading the nand, but while i was soldering the sdcard to the nand points, 2 of the points the 1 and the 15 came out. idk what happened! it was fine for the 15 but i needed the first, idk what to do, is there any other way to R/W the nand. i have all my parts ready, and i dont want them to go to waste because of one point, plz help!!! btw i have a corona v2. tnx.
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
hey guys! i was gonna rgh my xbox 360 and was doing the first step, reading the nand, but while i was soldering the sdcard to the nand points, 2 of the points the 1 and the 15 came out. idk what happened! it was fine for the 15 but i needed the first, idk what to do, is there any other way to R/W the nand. i have all my parts ready, and i dont want them to go to waste because of one point, plz help!!! btw i have a corona v2. tnx.
Take pictures of the issue points, upload them to Imgur, and post the links here.
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
what do u mean?? sry im a beginner.
7544da08455bfff0b4679dcdcb23c59c.png


You can use a fiberglass scratch pen to reveal the trace I circled in red.
Then you just solder to that.

It's going to be a lot harder than the original point - So be careful.
 
I

ilovemoddddssss

Newbie
Messages
6
Reaction score
0
Points
20
Sin$
0
7544da08455bfff0b4679dcdcb23c59c.png


You can use a fiberglass scratch pen to reveal the trace I circled in red.
Then you just solder to that.

It's going to be a lot harder than the original point - So be careful.


so i can solder on to the circle thing right? any precautions, is there a chance i can screw this up.
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
so i can solder on to the circle thing right? any precautions, is there a chance i can screw this up.
You can, but only after you reveal the trace.
You need to get the copper to show, otherwise you'll burn the sh*t out of that area.

I'd 100% recommend you get a fiberglass scratch pen, they look like this:
cefc666bc4b79cf974343d17c6c9574d.png


There's definitely a chance you can mess it up - It's a lot harder than the original point that you burned.
All I can recommend is that you do your best to solder directly onto that little circle part of the trace.
 
I

ilovemoddddssss

Newbie
Messages
6
Reaction score
0
Points
20
Sin$
0
You can, but only after you reveal the trace.
You need to get the copper to show, otherwise you'll burn the sh*t out of that area.

I'd 100% recommend you get a fiberglass scratch pen, they look like this:
cefc666bc4b79cf974343d17c6c9574d.png


There's definitely a chance you can mess it up - It's a lot harder than the original point that you burned.
All I can recommend is that you do your best to solder directly onto that little circle part of the trace.

bro, i have done evrything. i also created the ecc and wrote the ecc, but i did it before installing the ace v3 chip, that's fine i guess. but now i want to switch on my xbox for the cpu key and all that but how do i switch it on , i dont have a remote or anything. help!
 
Last edited:
I

ilovemoddddssss

Newbie
Messages
6
Reaction score
0
Points
20
Sin$
0
noobert , i have done. i did the trace thing and i kinda burnt it, but i got it!!!! xell came on screen, got the cpu key and finally did it!!! tnx for the support. i thought i broke the console or something, been sitting on this for hours! can't express my happiness.
 
Top Bottom
Login
Register