What's new

Solved Xbox 360 slim Trinity R3B15

  • Thread starter Woobyxd
  • Start date
  • Views 6,028
W

Woobyxd

Newbie
Messages
24
Reaction score
0
Points
35
Sin$
0
Hi, so I wanted to rgh my Trinity , while soldering the wire to R3B15 I think I damaged the trace and my xbox don't want to turn on , just beeps , power brick orange I want to ask if I can fix it by making a new trace to the resistor with a wire or it has to be a new 33ohm resistor. Thx for help you provide and I would be really happy if someone can post a little tutorial with the simpliest english ( no difficult words plox)language since English isn't my native language. My mb in attachment
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
Hi, so I wanted to rgh my Trinity , while soldering the wire to R3B15 I think I damaged the trace and my xbox don't want to turn on , just beeps , power brick orange I want to ask if I can fix it by making a new trace to the resistor with a wire or it has to be a new 33ohm resistor. Thx for help you provide and I would be really happy if someone can post a little tutorial with the simpliest english ( no difficult words plox)language since English isn't my native language. My mb in attachment

Part Two: Repairers
===============

Now, this isn't as hard as it seems like, especially, there's No trace cutting involved
wink.png


Items needed:

- Some extra wire.
- Any resistor ranging from 30 Ohm to 100 Ohm, But 33 Ohm is recommended.
- Some Soldering skills.
- A little patience.

The Procedure:

1. Whatever you've done to the R3B15, clean it. No need to try and put back the resistor if you got it removed. But try to clean up the extra solder up there , if present. If you are afraid you might damage something else in the process, don't worry, leave this step
wink.png


2. Take some wire, about 4 inches in length. Cut it into two making 2 wires of 2 inches each. Take the resistor, and solder one 2 inches of wire to both its sides. Doing this should get you something like this:

D4FPx.jpg


3. Solder one end of the wire-resistor combo here:

rP2Y8.jpg


4. Solder the other to FT3N2, here:

cawRm.jpg


5. Once done, connect you Xbox360 to the PSU and try to power it on. If it does, you're good to go.

Credits to: https://team-xecuter.com/forums/thr...BY_CLK-Fix-for-Slim-and-Phats-(Noob-Friendly)
 
W

Woobyxd

Newbie
Messages
24
Reaction score
0
Points
35
Sin$
0
Part Two: Repairers
===============

Now, this isn't as hard as it seems like, especially, there's No trace cutting involved
wink.png


Items needed:

- Some extra wire.
- Any resistor ranging from 30 Ohm to 100 Ohm, But 33 Ohm is recommended.
- Some Soldering skills.
- A little patience.

The Procedure:

1. Whatever you've done to the R3B15, clean it. No need to try and put back the resistor if you got it removed. But try to clean up the extra solder up there , if present. If you are afraid you might damage something else in the process, don't worry, leave this step
wink.png


2. Take some wire, about 4 inches in length. Cut it into two making 2 wires of 2 inches each. Take the resistor, and solder one 2 inches of wire to both its sides. Doing this should get you something like this:

D4FPx.jpg


3. Solder one end of the wire-resistor combo here:

rP2Y8.jpg


4. Solder the other to FT3N2, here:

cawRm.jpg


5. Once done, connect you Xbox360 to the PSU and try to power it on. If it does, you're good to go.

Credits to: https://team-xecuter.com/forums/threads/88489-TuT-Alternate-STBY_CLK-Install-STBY_CLK-Fix-for-Slim-and-Phats-(Noob-Friendly)
one more thing, if i want to rgh( coolrunner rev C) it later is it possible?

edit:
i just checked the tutorial u linked, thx a lot :wink:
 
Killjoy666

Killjoy666

Getting There
Messages
1,649
Reaction score
233
Points
190
Sin$
0
one more thing, if i want to rgh( coolrunner rev C) it later is it possible?

edit:
i just checked the tutorial u linked, thx a lot :wink:
Technically You Don’t Need The Resistor As The One For The Console Is Still In Place.

Just With A Simple Wire Should Work.
 
W

Woobyxd

Newbie
Messages
24
Reaction score
0
Points
35
Sin$
0
So i the tutorial above worked, i rgh'ed it everything boots, but when i want to install aurora from dashlauncher and error says its corrupt :frown: can someone help?
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
So i the tutorial above worked, i rgh'ed it everything boots, but when i want to install aurora from dashlauncher and error says its corrupt :frown: can someone help?
Install Aurora from DashLauncher?

Do you mean you're trying to set it as the default thing to boot into when you turn on the Xbox?
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
if i follow these steps mentioned in the guide, i will be able to install aurora as usual? thx a lot you saved my console btw :smile:
I'm not sure if it'll fix the Aurora issue, but it's definitely a step in the right direction.
 
Top Bottom
Login
Register