What's new

Solved Bum ace v3 or nah?

A

Audiogamerman

Newbie
Messages
5
Reaction score
0
Points
35
Sin$
7
Why won't this boot xell?

Trinity, j-runner, x360ace v3, jr programmer

I've shown the latest log to keep things clean but know that I have tried several timing files with exact same results, I've reached out to other outlets and been scrutinized about soldering until it was up to "meh, it should work" quality to them. I've checked everything with a dmm and readings are in order. So I'm assuming the ace v3 is bad or I'm missing something in software. Thank you for any help.

Checking Console..
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to C:\Users\q6600\Downloads\J-Runner - Copy\output\nanddump1.bin
Reading Nand
Done!
in 3:40 min : sec

Reading Nand to C:\Users\q6600\Downloads\J-Runner - Copy\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Glitch2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:40 min : sec

Comparing...
Nands are the same
Comparing...
Nands are the same
ECC created
Version: 10
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:18 min : sec

USB XSVF Player Initialized
Xilinx XC2C128-VQ100 ......... [DETECTED]
Erase Succeeded
File: C:\Users\q6600\Desktop\15432 timing files\TRINITY\300 Mhz\timing_60.6\TR_L_0.6_T_60.6.xsvf
Sending Out Packets .........
Success
 
https:// ibb.co/kBeeym
https:// ibb.co/dU63PR
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,382
Reaction score
4,645
Points
2,315
Sin$
0
Why won't this boot xell?

Trinity, j-runner, x360ace v3, jr programmer

I've shown the latest log to keep things clean but know that I have tried several timing files with exact same results, I've reached out to other outlets and been scrutinized about soldering until it was up to "meh, it should work" quality to them. I've checked everything with a dmm and readings are in order. So I'm assuming the ace v3 is bad or I'm missing something in software. Thank you for any help.

Checking Console..
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to C:\Users\q6600\Downloads\J-Runner - Copy\output\nanddump1.bin
Reading Nand
Done!
in 3:40 min : sec

Reading Nand to C:\Users\q6600\Downloads\J-Runner - Copy\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Glitch2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:40 min : sec

Comparing...
Nands are the same
Comparing...
Nands are the same
ECC created
Version: 10
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:18 min : sec

USB XSVF Player Initialized
Xilinx XC2C128-VQ100 ......... [DETECTED]
Erase Succeeded
File: C:\Users\q6600\Desktop\15432 timing files\TRINITY\300 Mhz\timing_60.6\TR_L_0.6_T_60.6.xsvf
Sending Out Packets .........
Success
 
https:// ibb.co/kBeeym
https:// ibb.co/dU63PR
Looks like it, nothing wrong with your soldering or the log.
There was a bad batch of them a few months ago, you might have gotten a left over of those - or just got unlucky otherwise.

Also, super nice soldering and pictures.
 
Q

quest2

Newbie
Messages
16
Reaction score
0
Points
20
Sin$
0
hmm wondering if mines bad or it's just incredibly difficult to rgh a 360. Second xbox still won't boot. I thought 5 wires would be an easy install after doing ps2's but i'm ready to throw my 360 stuff away.
 
Killjoy666

Killjoy666

Getting There
Messages
1,649
Reaction score
233
Points
190
Sin$
0
Why won't this boot xell?

Trinity, j-runner, x360ace v3, jr programmer

I've shown the latest log to keep things clean but know that I have tried several timing files with exact same results, I've reached out to other outlets and been scrutinized about soldering until it was up to "meh, it should work" quality to them. I've checked everything with a dmm and readings are in order. So I'm assuming the ace v3 is bad or I'm missing something in software. Thank you for any help.

Checking Console..
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Version: 10
Flash Config: 0x00023010
00023010
Trinity, Jasper 16MB
CB Version: 9231
Trinity
Reading Nand to C:\Users\q6600\Downloads\J-Runner - Copy\output\nanddump1.bin
Reading Nand
Done!
in 3:40 min : sec

Reading Nand to C:\Users\q6600\Downloads\J-Runner - Copy\output\nanddump2.bin
Initializing nanddump1.bin..
Trinity
Glitch2 Selected
Nand Initialization Finished
Reading Nand
Done!
in 3:40 min : sec

Comparing...
Nands are the same
Comparing...
Nands are the same
ECC created
Version: 10
Flash Config: 0x00023010
Writing Nand
image_00000000.ecc
Done!
in 0:18 min : sec

USB XSVF Player Initialized
Xilinx XC2C128-VQ100 ......... [DETECTED]
Erase Succeeded
File: C:\Users\q6600\Desktop\15432 timing files\TRINITY\300 Mhz\timing_60.6\TR_L_0.6_T_60.6.xsvf
Sending Out Packets .........
Success
 
https:// ibb.co/kBeeym
https:// ibb.co/dU63PR
Try Out Other Timing Files.
 
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,669
Reaction score
1,100
Points
1,045
Sin$
7
X1337XSNIP3R

X1337XSNIP3R

Enthusiast
Messages
321
Reaction score
13
Points
80
Sin$
7
A

Audiogamerman

Newbie
Messages
5
Reaction score
0
Points
35
Sin$
7
Newsk

Newsk

Contributor
Messages
2,602
Solutions
5
Reaction score
348
Points
350
Sin$
7
As mentioned above I would try another ace. If u had a "known working chip" that would be ideal, and answer that question .
Back several months ago when I started receiving bad batches of aces that would barely boot trinitys I would quickly switch the chip/wiring over to project muffin with matrix v3 (or rev d) which only takes a minute to do. Then I at least knew the chips were at fault and not my work.

I eventually found an old ace that I knew was good so I could quickly swap out for diagnosis.
 
A

Audiogamerman

Newbie
Messages
5
Reaction score
0
Points
35
Sin$
7
It seems a bunch of the "srgh" files give me three short blinks, I tried with my own ecc and speed up ecc but all don't boot to xell and they all eventually make the console go red dot
 
ForbiddenDarkness

ForbiddenDarkness

Newbie
Messages
2
Reaction score
0
Points
20
Sin$
0
Is there a way to find out you have a bad X360 Ace V3? like poor quality solder, or by symptoms the board display when it's installed.

Thanks In Advance
 
ForbiddenDarkness

ForbiddenDarkness

Newbie
Messages
2
Reaction score
0
Points
20
Sin$
0
That Would Be By Installing A Know Working X360ace V3 To It.
I just bought 3 of them, first time using these boards so I don't have a good working one to compare. I just hope these boards aren't from the bad batch, but thanks for your reply Killjoy666.
 
Top Bottom
Login
Register