What's new

Hardware Mods XBox 360 Slim mods

  • Thread starter Chris Doherty
  • Start date
  • Views 1,894
TranzRail

TranzRail

Newbie
Messages
11
Reaction score
4
Points
45
Sin$
0
Nice mod, did you source a custom case or did you do yourself? What hardware did you use to mod?
 
C

Chris Doherty

Newbie
Messages
29
Reaction score
3
Points
45
Sin$
7
Thanks

Its the original case, all home-made:cool:
I used a standard air saw/dremal and my knowlage of measurement, ive done a few paint jobs before also had 12v leds tapped into the dvd drive power
 
PhoenixMods

PhoenixMods

Banned
Messages
79
Reaction score
26
Points
70
Sin$
0
Impressive job, man. Personally I would've left the sync button black, but I love the color of the rest of the console.
 
C

Chris Doherty

Newbie
Messages
29
Reaction score
3
Points
45
Sin$
7
Impressive job, man. Personally I would've left the sync button black, but I love the color of the rest of the console.

Thanks alot mate :smile: when i did it i didnt really think about the fine tuning of what i wanted to paint etc
 
T

Tylershep3

Newbie
Messages
6
Reaction score
0
Points
35
Sin$
7
As somebody who wants to make a custom case, what are the required things?
 
GModz Tuts

GModz Tuts

Se7ensins Un-Official Lobby Verifier
Free Hoster Hardened Veteran Mr. Nice Guy
Messages
3,064
Reaction score
719
Points
450
Sin$
0
Just joined and wanted to show off my first modded/rghed console


http://imgur.com/SiDbPUz

http://imgur.com/Ta6Z94K

Thanks

Not bad, although the sync button being painted poses a issue as it doubles as the IR reciever. So now, the IR reciever wont work (aka media remotes, Galaxy phones, remotes to control it other than xbox controllers basically)

Also, Drawing power from the DVD drive can cause a number of issues, i suggest relocating the power source to a 12v point off the power connector.
 
C

Chris Doherty

Newbie
Messages
29
Reaction score
3
Points
45
Sin$
7
As somebody who wants to make a custom case, what are the required things?
When I did this mod, was used wire wool + wet/dry sand paper, Grey primer, that colour paint, mask tape, If i remember a 1/4" hack blade as my dremal was broke:banghead:, rulers pens etc to draw with and a steady hand

Marking the case to be cut is quite easy as i knew what i wanted to cut away.

The plexy glass was quite thin also as any thicker would come into contact with the dvd shell.

This was one of many mods I have had, I have learnt greatly from my mistakes like cutting to much of the dvd shell away. Little things like that. But really there should be nothing to be afraid of when doing case mods:cool:

Is it RGHED?
Yep, I had a deMon installed(not at the time of the pics) and currently a cr rev c

Not bad, although the sync button being painted poses a issue as it doubles as the IR reciever. So now, the IR reciever wont work (aka media remotes, Galaxy phones, remotes to control it other than xbox controllers basically)

Also, Drawing power from the DVD drive can cause a number of issues, i suggest relocating the power source to a 12v point off the power connector.
Thanks!!
I took out the LED's from the xbox as 2 of them became faulty, and also the controllers worked flawlessly to this day
 
mrwar117

mrwar117

Newbie
Messages
2
Reaction score
0
Points
35
Sin$
0
When I did this mod, was used wire wool + wet/dry sand paper, Grey primer, that colour paint, mask tape, If i remember a 1/4" hack blade as my dremal was broke:banghead:, rulers pens etc to draw with and a steady hand

Marking the case to be cut is quite easy as i knew what i wanted to cut away.

The plexy glass was quite thin also as any thicker would come into contact with the dvd shell.

This was one of many mods I have had, I have learnt greatly from my mistakes like cutting to much of the dvd shell away. Little things like that. But really there should be nothing to be afraid of when doing case mods:cool:


Yep, I had a deMon installed(not at the time of the pics) and currently a cr rev c


Thanks!!
I took out the LED's from the xbox as 2 of them became faulty, and also the controllers worked flawlessly to this day
Nice console, i just wanted to point out that he was talking about remotes and such having issues, not the controllers. But nice build man really like it. The chrome and the red are good together.
 
OTC TIMBER

OTC TIMBER

Enthusiast
Messages
1,447
Reaction score
95
Points
170
Sin$
7
You still want to show off your mods?....GT:BLACK MAMBA 873 im im playing mw3 xbox 360
 
Top Bottom
Login
Register