What's new

Discussion NXOE applying update fix

  • Thread starter EpicFai1z
  • Start date
  • Views 2,647
EpicFai1z

EpicFai1z

Enthusiast
Messages
621
Reaction score
189
Points
125
Sin$
7
if your xbox gets stuck around a 3rd of the progress bar when applying the new update follow these steps and it should fix the issue worked for me and 2 of my friends.

Here is how i fixed my installation issues

1. Turn off console fully by holding the power button
2. Disconnect all USB devices
3. Unplug all cables at back apart from hdmi out, this includes power and Ethernet
4. Leave for a minute and re-plug the power lead back in and turn on the console
5. Applying update will continue once done you will get an update is available screen again
6. Plug back in the Ethernet cable and select install update
7. The console will re-download the update which is around 1GB if i remember
8. Once downloaded it will get applying update screen again here it will restart a couple time as the progress gets closer to completion, for reference mine restarted 3 times total before finishing.
9. Success you should now have NXOE re-plug all cables that you had earlier removed.

hope this helps anyone else having the same issue i had
 
V

V7X3

Worship the Digital Age
Messages
824
Reaction score
405
Points
175
Sin$
-7
I left all of my peripherals in and did a couple of hard resets. Suppose I'm a lucky one haha. This guide should be useful for people though.
 
screwFACE65

screwFACE65

▓▓▓▓▓▓▓▓▓▓
Seasoned Veteran Grizzled Veteran
Messages
1,195
Reaction score
221
Points
200
Sin$
7
if your xbox gets stuck around a 3rd of the progress bar when applying the new update follow these steps and it should fix the issue worked for me and 2 of my friends.

Here is how i fixed my installation issues

1. Turn off console fully by holding the power button
2. Disconnect all USB devices
3. Unplug all cables at back apart from hdmi out, this includes power and Ethernet
4. Leave for a minute and re-plug the power lead back in and turn on the console
5. Applying update will continue once done you will get an update is available screen again
6. Plug back in the Ethernet cable and select install update
7. The console will re-download the update which is around 1GB if i remember
8. Once downloaded it will get applying update screen again here it will restart a couple time as the progress gets closer to completion, for reference mine restarted 3 times total before finishing.
9. Success you should now have NXOE re-plug all cables that you had earlier removed.

hope this helps anyone else having the same issue i had
if you get stuck on the applying update screen you don't have to do all of that..^

1.tap the power button
2.wait 5 seconds
3.Tap the power button again
4.let it turn off and then turn it back on, it will continue to apply update.
(Reddit method)

I had to do it twice but it worked
 
Chelsea Grinner

Chelsea Grinner

LETS BURN THIS BASTARD TO THE GROUND
Messages
416
Reaction score
92
Points
115
Sin$
0
if you get stuck on the applying update screen you don't have to do all of that..^

1.tap the power button
2.wait 5 seconds
3.Tap the power button again
4.let it turn off and then turn it back on, it will continue to apply update.
(Reddit method)

I had to do it twice but it worked
This is what I did. Also found on reddit.
 
EpicFai1z

EpicFai1z

Enthusiast
Messages
621
Reaction score
189
Points
125
Sin$
7
if you get stuck on the applying update screen you don't have to do all of that..^

1.tap the power button
2.wait 5 seconds
3.Tap the power button again
4.let it turn off and then turn it back on, it will continue to apply update.
(Reddit method)

I had to do it twice but it worked

I actually done this and a variety of other fixes that I saw on the support forum and none work in my case until I unplugged everything so it may effect others differently
 
M4YON

M4YON

Se7ensins Beast
Mythical Veteran Nevar gon' happen in your lifetime Platinum Record
Messages
5,766
Reaction score
1,973
Points
1,055
Sin$
0
I actually done this and a variety of other fixes that I saw on the support forum and none work in my case until I unplugged everything so it may effect others differently

The official forums troubleshooting say unplug your power cable mid update so that's probably why unplugging worked for you.
 
Top Bottom
Login
Register