Jamebong
Enthusiast
Some how I managed to put two different crew colors as primary / secondary on my Kuruma and I was able to put pearlescent on the primary color. I am the leader of the crew so Im assuming you have to be the leader to do this but again I'm not sure. First I used a custom glow blue and set the hex code as my crew color then put it as primary on the kuruma. Few hours later (probably don't have to wait) I switched to a neon green and applied it as secondary. Usually this would change the primary as well since they're both set as crew colors but for some reason the blue stuck with the green. I then did the pearlescent on any type of paint glitch and was able to put pearl on the blue and of course it went to the green as a secondary too. I have tried this with other cars but no luck so far. Im hoping someone can play around with this and fine tune it a bit.
I guess this^ is unclear so:
1. Set primary color to crew
2. Change crew color and wait afew hours for it to change
3. Restart console
3. Select crew color in secondary (Primary shouldn't change to new crew color if it does then don't continue)
4. Go back to primary colors and do pearlescent on any type of paint glitch
When I did the pearlescent glitch I was able to pick any pearl color on the primary without it reverting to black.
Below I also did this with a zentorno and came out with a different result. After applying new crew color to secondary, it glitched and applied the old crew color to secondary and the new color as some type of pearl / under coat? Idk what to call it but the car is light yellow and glows green.
I guess this^ is unclear so:
1. Set primary color to crew
2. Change crew color and wait afew hours for it to change
3. Restart console
3. Select crew color in secondary (Primary shouldn't change to new crew color if it does then don't continue)
4. Go back to primary colors and do pearlescent on any type of paint glitch
When I did the pearlescent glitch I was able to pick any pearl color on the primary without it reverting to black.
Below I also did this with a zentorno and came out with a different result. After applying new crew color to secondary, it glitched and applied the old crew color to secondary and the new color as some type of pearl / under coat? Idk what to call it but the car is light yellow and glows green.
Last edited: