What's new

Tutorial [XGD3] How to easily burn DVD+DLs.

  • Thread starter Styx HD
  • Start date
  • Views 4,283
Styx HD

Arianna granede

Enthusiast
Messages
303
Reaction score
15
Points
70
Sin$
0
I consulted these two as sources.http://forums.afterd...utorial-914320/
http://www.team-xecu...ead.php?t=73745

You'll need:
1. iHAS124-B Burner
2. Kodak DVD+R DL Blanks (Cake box)
3. My FW pack
Start by connecting your drive to your computer and make sure that it is recognized.
1. Follow the first source tutorial to flash the drive to c4eva's CFW.
2. Reboot
3. Open Flash_Utility.exe
4. Select Read Flash
5. Save it
6. Select Write Flash
7. Select "PATCHED -iHAS-124B-AL0S-MKM001MKM003-final_speedpatched.bin"
8. Let it flash it
9. Reboot
10. Open EEPROM_Utility.exe
11. Go to the options tab
12. Make sure ONLY "SmartBurn" is checked
13. Exit it.
14. Open IMGBurn
15. Go to settings (Tools -> Settings)
16. Go to the "Write" tab
17. Make sure "Perform OPC before write" is UN-checked
18. Make sure "Enable BURN-Proff" is checked
19. Make sure "Layer Break" is set to "Calculate Optimal"
20. Start burning at 2.4xI've made 8 XDG3 burns so far that verify 100% and over 10 XGD2s that verify 100% as well. Your cheap disks and cheap drive can produce logs as glorious as this:



Boom! If i helped you Then I helped you! :tongue:
 
Styx HD

Arianna granede

Enthusiast
Messages
303
Reaction score
15
Points
70
Sin$
0
No I made one and Ive had an account since... 2010 But I forgot all my User info! :tongue:
So im back
 
ZMOT

ZMOT

Steve Harvey
AzzidReign Jr Fabled Veteran Hardened Veteran
Messages
3,250
Reaction score
1,371
Points
445
Sin$
-7
I was wondering if my ihas is already flashed with c4evas firmware can I just start from step 14? I bought mine preflashed with the firmware but I haven't received it to try yet.
 
Top Bottom
Login
Register