What's new

Solved Xbox rgh wont boot

  • Thread starter Aidan Smith
  • Start date
  • Views 2,004
A

Aidan Smith

Newbie
Messages
33
Reaction score
0
Hello I need some help obviously.

So awhile back I put this spoof live server on my rgh, I don't remember the name but ever since I have put it on there it will not load. The booting screen doesn't even come up anymore. Its just a black screen that says. input not found which means its not connected. But I know its connected because if I push the disk tray out it still comes up with the xell reloaded. I've tried to bypass the plugins with the one switch then disk tray but that does not work and putting lanch.ini on a flash drive does not work if anyone can help it would be greatly appreciated.

Edit: I removed the Hard drive and nothing changed

Edit 2: When turned on normaly the ring does not light up at all other then the middle of it.

Please someone must know how to fix this
 
Last edited:
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
Hello I need some help obviously.

So awhile back I put this spoof live server on my rgh, I don't remember the name but ever since I have put it on there it will not load. The booting screen doesn't even come up anymore. Its just a black screen that says. input not found which means its not connected. But I know its connected because if I push the disk tray out it still comes up with the xell reloaded. I've tried to bypass the plugins with the one switch then disk tray but that does not work and putting lanch.ini on a flash drive does not work if anyone can help it would be greatly appreciated.
Well If You Just Get A Black Screen After You Put A Clean Launch.ini Best Thing To Do Is Reflash The Nand.
 
A

Aidan Smith

Newbie
Messages
33
Reaction score
0
Is there possibly a way for me to start over on my RGH. Like wipe all the data?
 
I

ImOx

(^._.^)ノ
Retired
Messages
9,968
Reaction score
2,963
It doesn't boot if you remove the hard drive, correct?

Well if that's the case, boot to XeLL and log into the local IP it gives you.
(Log in with e.g. your web browser)
And then download your nand from the panel that opens up.
 
A

Aidan Smith

Newbie
Messages
33
Reaction score
0
It doesn't boot if you remove the hard drive, correct?

Well if that's the case, boot to XeLL and log into the local IP it gives you.
(Log in with e.g. your web browser)
And then download your nand from the panel that opens up.
Where does it say the local ip in XeLL
 
A

Aidan Smith

Newbie
Messages
33
Reaction score
0
Should say it right there.
XeLL can get stuck tho.
What's the last line of text it displays?
It says *Looking for files on local media and TFTP...
This its just a line saying different tings as changing, this such as "No packet sending" and "No answer from server"
 
I

ImOx

(^._.^)ノ
Retired
Messages
9,968
Reaction score
2,963
It says *Looking for files on local media and TFTP...
This its just a line saying different tings as changing, this such as "No packet sending" and "No answer from server"
Ye, that means it doesn't get stuck anywhere, it loads all the way.
That's good.

But well, assuming you have the console connected to your LAN, it should just display the local IP right there.
 
A

Aidan Smith

Newbie
Messages
33
Reaction score
0
Ye, that means it doesn't get stuck anywhere, it loads all the way.
That's good.

But well, assuming you have the console connected to your LAN, it should just display the local IP right there.[/

Is it the two Ips after it says network config, if so where do I put it to download my nand.
 
I

ImOx

(^._.^)ノ
Retired
Messages
9,968
Reaction score
2,963
Is it the two Ips after it says network config, if so where do I put it to download my nand.
Well I don't remember fully what the screen looks like, but it'll be the one that looks like a local IP, lol.
It'll most likely look like this: 192.168.x.x

And then just log into that IP with using e.g. your web browser.
(Type it into your search bar and hit enter)
 
A

Aidan Smith

Newbie
Messages
33
Reaction score
0
Well I don't remember fully what the screen looks like, but it'll be the one that looks like a local IP, lol.
It'll most likely look like this: 192.168.x.x

And then just log into that IP with using e.g. your web browser.
(Type it into your search bar and hit enter)
Ok so I put my ip in the search bar and its just coming up with a bunch of search results, Where am i supposed to go.
 
I

ImOx

(^._.^)ノ
Retired
Messages
9,968
Reaction score
2,963
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,670
Reaction score
1,087
That's exactly what I did. What if my xbox is not connected to the internet what should i do?
It needs to be connected via an ethernet cable, otherwise it won't work.
 
A

Aidan Smith

Newbie
Messages
33
Reaction score
0
It needs to be connected via an ethernet cable, otherwise it won't work.
What browser do you use? You probably put it to a Google search or something like that.
In Chrome you'd just type it into the search bar. Don't know about any other browsers, couldn't imagine it being different though.

http://image.prntscr.com/image/06f5f1dffadf48dabadc6aa4f377c035.png
OK I filally got there and have downloaded the flashdmp.bin. WHat do I do next.
 
A

Aidan Smith

Newbie
Messages
33
Reaction score
0
"Update" your dashboard by following e.g. this video:
https://www.youtube.com/watch?v=ZzHBbzFXS54
(Now you already have your nand, so skip the first few steps)
Ok so I followed the tutorial in the description on that video since I have a corona but when i put the flash dump in there it tells me there is an issue with it. I tried redownloading it and it still tells me the same this.
 
Top Bottom