Sec
Halo ✔️
Hello Se7enSins
I recently deceived to do my own Xbox One case mod/LED's. My warranty was up so what the heck, I had no idea where to start beside the color I wanted everything. I have done lights and stuff for Xbox 360 but not the One. I tried to look up where to put the LED's and where the 12 V points where. Everyone I talked to was for the Disc drive and so on. So I went on my own and took some pictures so maybe this will help for when ever or if you decide to put lights/LEDs in.My Xbox Mods
Red LED's for Controller,chat mute, Console, Kinect, Power Brick, Also LED strips
120MM Clear 3 speed Fan mod
Inverted Grill.
I would suggest a couple of things
Good Soldering Skills for the Small LED's
Flux, So you don't burn the boards and can help guide the solder
Steady hands
I used 0805 LED's, i would also recommend this page if you dont know what the + or - sides of the LED's are.
This is the 12V points for the LED Strips under the Xbox
12V for Fan Mod where the original fan was
Left wire + Right -
And my Xbox One In progress
Xbox One Done
In the Dark
Then the 3speed Control.
Elite Controller added XD
Please let me know what you think
And if you need any help just ask.
12V for Fan Mod where the original fan was
Left wire + Right -
And my Xbox One In progress
Xbox One Done
In the Dark
Then the 3speed Control.
Elite Controller added XD
Please let me know what you think
And if you need any help just ask.
Last edited: