i have two xboxs both with benq drives one xbox is rrod and the others drive stopped working. i want to swap them but u cant swap the chip in a benq without cuting stuff i dont whant to do that. if there are any other options or anything pleas help.
Lol this would work and be alot cheaper. You wouldn't have to buy a mod chip.Blu3 1ightning said:how is the drive dead is it the motor or the lasar or what if so im sure you can swap either one out of the rrod xbox without needing the key
it not completely dead. you know how the laser and stuff drop down when you hit eject it wont drop down but only when the cover is on the magnet wont let go of it.Blu3 1ightning said:how is the drive dead is it the motor or the lasar or what if so im sure you can swap either one out of the rrod xbox without needing the key
ya that's not it theirs 2 magnets that wont pull apart unless you do it manually whill its take apartjoshandrok said:Have you tried to take it apart and clean it. There might be something getting stuck in the gears, or maybe the rubber band is dirty. That's what happened to mine when it wouldn't open. Try to clean it as good as possible. If that doesn't work then I don't know what to tell you.
ya that's what i want to do i have to flash the keys to the other drive tho you cant swap the chip out because on the benq the chip is solider to some wires i don't to cut.joshandrok said:Like the guy above said. If you know the DVD keys you should be able to swap drives as long as you change the key of one to match the one you want to swap out. I may be wrong though. . .
kind of the chip solder onto motor and laser.Blu3 1ightning said:well cant you just swap the whole laser assembly. the motor and laser or is that assembly connected to the board. just try it, it cant hurt and its less work then modding i think