What's new

Unsolved Xbox 360 turn on but won't boot up

L

Luger_69

Newbie
Messages
31
Reaction score
0
Hi guys
So recently i was playing xbox 360 so i turn it off and go to sleep
The next i want to turn it on , it turns on but it's only the fan and green light in the middle
I checked out my HDMI cable, i try 2 of them but still won't boot up
This problem came to me from time to time
I try another xbox 360 in the same cable and it boots up pretty fast
Can anyone have solution for this
I try everything single solution i even switched the tv but still don't boot up
 
B

BluesMan67

Enthusiast
Messages
279
Reaction score
32
Nope jtag
Got to agree with "afterjo" on this.If you still have the original nand dumps from that console and you re-flash 1 of the dumps back to the nand.It'll red ring of death on you.
It might be worth a shot at reflowing the 360 board (loads of tuturials over on Youtube on how to do this) and see if it boots back up after the board has been reflowed.Make sure to clean off the old thermal paste from both CPU and GPU chips and from their heatsinks,then apply new fresh artic 5 silver thermal paste.
 
L

Luger_69

Newbie
Messages
31
Reaction score
0
NO no
The problem came to xbox from time to time
Yesterday worked fine but today won't boot up again
 
O

Owens87

samus
Premium
Messages
9
Reaction score
1
NO no
The problem came to xbox from time to time
Yesterday worked fine but today won't boot up again
try what i do turn off and remove power supply boot up without youre hard drive in it and if it loads just check out if xex menu is still on there is so turn off put hard drive back in and if it still dosent you may need a new hard drive
 
G

gordsa

Newbie
Messages
18
Reaction score
0
Id shoot for a worn hdmi socket thats connecting sometimes and sometimes not. Console wont glitch if the tv isnt detected.
 
Top Bottom