Solved Xbox 360 slim corona, matrix glitcher question

[SMPTE]

Hey guys, so within the next week or 2 I will be doing a rgh corona with a matrix glitcher. I have never used the matrix glitcher and usually stuck to the rev c coolrunner. Anyways, for a corona mobo, is it just the glitcher I need, or do I need to buy a crystal too. Link is bellow the matrix glitcher that I am planning to buy. Also I heard about covering some parts with solder (the 6 solder spots on the left of the chip), any chance anyone can guide me which ones need to be covered for a corona. Thanks guys.

http://www.ebay.co.uk/itm/New-Matri...rboard-SYUK-/321876085083?hash=item4af14f495b

 

[HuskerHeaven]

That is not the one you want. Check here. You will see the crystal on the bottom right. As far as which points to bridge, I've never used one on a slim, but I would try the top and bottom two on the slim side and just play with different settings until you get it where you want it.

 

[SMPTE]

That is not the one you want. Check here. You will see the crystal on the bottom right. As far as which points to bridge, I've never used one on a slim, but I would try the top and bottom two on the slim side and just play with different settings until you get it where you want it.

Okay I see, no one really sells any one with a crystal locally, could I just a buy crystal and solder it on myself? 

Okay I see, no one really sells any one with a crystal locally, could I just a buy crystal and solder it on myself?

Oh lol thankyou so much, just realised this is in the uk Thanks again

 

[RedEyedJesus]

Okay I see, no one really sells any one with a crystal locally, could I just a buy crystal and solder it on myself? 

Oh lol thankyou so much, just realised this is in the uk Thanks again

I'd be using a CR3 Lite to be honest. I'm based in the UK, PM me your address i'll have a crystal at your door in two days for free