What's new

Solved XBOX 360 S RGH CR3 LITE Booted XELL??

  • Thread starter james3
  • Start date
  • Views 156
J

james3

Newbie
Messages
17
Reaction score
0
Hello, I just turned on my console and I left it boot (sometimes need lots of time) then when I came back I found Xell loaded on the screen instead of the Dashboard.
Then I turned it off and on again and the Dashboard started normally

What does that means ?
 
N

Noobert

RGH/Flashing Support
VIP
Retired
Messages
8,385
Reaction score
4,624
Hello, I just turned on my console and I left it boot (sometimes need lots of time) then when I came back I found Xell loaded on the screen instead of the Dashboard.
Then I turned it off and on again and the Dashboard started normally

What does that means ?
Xell is what you get if you use the Eject Button to turn on your console.
It let's you reflash your nand easy if you screw it up at some point.
 
J

james3

Newbie
Messages
17
Reaction score
0
Xell is what you get if you use the Eject Button to turn on your console.
It let's you reflash your nand easy if you screw it up at some point.
Ok thanks! I didn't know that, good to know!
Maybe it worths to backup my actual NAND just in case of need I can write it back to my console.

Question: my RGH XBOX 360 S has Dashboard Version 2.0.17489, do I need / is it possible upgrade it ?

I don't have the original NAND since I bought the console used with already with RGH (CR3 Lite)

thanks
 
N

Noobert

RGH/Flashing Support
VIP
Retired
Messages
8,385
Reaction score
4,624
J

james3

Newbie
Messages
17
Reaction score
0
thanks again bu do i need to update and why?
 
Top Bottom