What's new

Solved Xbox 360 One Green Light Of Death

Pablo007

Pablo007

Newbie
Messages
8
Reaction score
0
Points
10
Hello everyone I hope y'all doing good, I came here for my problem coming from my Xbox 360 rgh that I wanted to update its dashboard to the latest, so I dumped with Simple 360 Nand Flasher and I used xebuild GUI to build the hacked image of the latest dashboard, then when I updated it should shut off, as a suggestion from a youtube video saying you need to unplug the power supply and plug it again but when I did it al I hear is the fan of the 360 working quite but the console itself when turned on there is only the middle green dot that is on the no signal on my tv
btw I have my CPU key and my DVD key console id and serial number for info
any suggestions to fix my problem please reply to me I've tried to paste a blank launch.ini on a flash drive and put it on the console but nothing worked
 
Lucky

Lucky

Classique is best
Super Moderators
Premium
Scaling the Mountain Beginning of An Odyssey Bright Idea
Messages
4,492
Solutions
13
Reaction score
1,599
Points
1,585
Do you still have XeLL access?

Ie pressing disc eject button on the faceplate when console is not powered on.
 
Pablo007

Pablo007

Newbie
Messages
8
Reaction score
0
Points
10
Do you still have XeLL access?

Ie pressing disc eject button on the faceplate when console is not powered on.
no i don't have XeLL Access when i turn it on it just keeps the middle green dot on that's it
 
Lucky

Lucky

Classique is best
Super Moderators
Premium
Scaling the Mountain Beginning of An Odyssey Bright Idea
Messages
4,492
Solutions
13
Reaction score
1,599
Points
1,585
No XeLL is an issue, however, revert to some basic troubleshooting…
Is your HDMI plugged in properly/monitor input on the correct input?
Have you tried removing the HDD?
Are you using correct PSU?
 
Pablo007

Pablo007

Newbie
Messages
8
Reaction score
0
Points
10
i verified the HDMI and it wad safely plugged, then I tried to remove the HDD and nothing changed , but what do you mean by using the correct PSU
 
Lucky

Lucky

Classique is best
Super Moderators
Premium
Scaling the Mountain Beginning of An Odyssey Bright Idea
Messages
4,492
Solutions
13
Reaction score
1,599
Points
1,585
The power supply, if its not the correct one it can cause issues. Usually, only if the PSU is a lower amp than the console needs.
Ie using a corona PSU on a trinity, or a jasper on a xenon.
 
Pablo007

Pablo007

Newbie
Messages
8
Reaction score
0
Points
10
The power supply, if its not the correct one it can cause issues. Usually, only if the PSU is a lower amp than the console needs.
Ie using a corona PSU on a trinity, or a jasper on a xenon.
no i use its original power supply i have no issues with it
so what's the problem with my console ? can I fix it?
 
Lucky

Lucky

Classique is best
Super Moderators
Premium
Scaling the Mountain Beginning of An Odyssey Bright Idea
Messages
4,492
Solutions
13
Reaction score
1,599
Points
1,585
More than likely it can be fixed, however, you may need to open the console up and reflash the nand using a JRProgrammer and soldering it in.
I’m assuming the nand flash was corrupted, which is soft-bricking your console.
 
Pablo007

Pablo007

Newbie
Messages
8
Reaction score
0
Points
10
is there any other way to fix it except for this cause I don't have jr programmer ( btw I just opened it yesterday to try and maybe clean it to fix that but it didn't lol)
 
Lucky

Lucky

Classique is best
Super Moderators
Premium
Scaling the Mountain Beginning of An Odyssey Bright Idea
Messages
4,492
Solutions
13
Reaction score
1,599
Points
1,585
is there any other way to fix it except for this cause I don't have jr programmer ( btw I just opened it yesterday to try and maybe clean it to fix that but it didn't lol)
If you’re unable to even get XeLL, it’s unlikely. You do have back up copies of your nand from before the update still correct though?

And just to
 
Pablo007

Pablo007

Newbie
Messages
8
Reaction score
0
Points
10
i have the dump file of my console and a KV info text file that created itself


just please tell me how can I fix it without jrprogrammer
 
Last edited:
Pablo007

Pablo007

Newbie
Messages
8
Reaction score
0
Points
10
ok so i gave it to someone who troubleshoots these kind of things and he told me that the chip is not working anymore or not good
 
Elmomo389

Elmomo389

Newbie
Messages
1
Reaction score
0
Points
20
ok so i gave it to someone who troubleshoots these kind of things and he told me that the chip is not working anymore or not good
the glitch chip can stop glitching the console when the console has a bad nand flash you probably put the wrong glitch type or console type depending what program youre using.
 
Pablo007

Pablo007

Newbie
Messages
8
Reaction score
0
Points
10
thank you for helping me to try and fix it so the guy fixed it for me for about 25 dollars and he told me that it was an image problem so now its working perfectly fine with no problem
 
Top Bottom
Login
Register