What's new

Unsolved Xbox 360 jasper 512mb wont boot to xell

S

Sakuya50

Newbie
Messages
8
Reaction score
0
im trying to do rgh 1.2 but my console wont boot to xell i already used all the timing files and is still not working im using a matrix v3 glitcher with no oscilator and jr 2 programmer bought from aliexpress i already dumped the nand back and the console just turns on normally and tried again but is still not working what i can do?
 
G

gunn1e

Newbie
Messages
31
Reaction score
5
post some pics of wiring/soldering otherwise its so hard to tell.
 
R

Risking Perfect

If I'm online, my kids asleep.
Super Moderators
Messages
851
Reaction score
228
Image 1: Both Wires may be shorting due to the length of exposed wire, it looks like they may be touching other points. I recommend trimming the exposed wire down and making sure they aren't touching any other point.
Image 2: Looks ok, clean it up around the bad a little if anything.
Image 3: The same situation as image 1, trim the exposed wire a little bit.
Images 4-5: Can't see much so I can't give any information.
 
Top Bottom