AGR Modz
Enthusiast
Hey guys.
Basically this is what ive done so far, the console is a corona V1 so does not require a post fix, so ive read the nand successfully with 2 dumps, i have then created the ecc then wrote the ecc. So then i programed my ace v3 with a corona ace file. I have soldered it to all the points needed but it glitches but wont boot. It flashes green a couple times then stops then continues. Ive doubled check to make sure nothing is shorting and i hope you guys can trust me that my soldering is good. I've tried multiple timing files with no success. Any help with be greatly appreciated.!
Basically this is what ive done so far, the console is a corona V1 so does not require a post fix, so ive read the nand successfully with 2 dumps, i have then created the ecc then wrote the ecc. So then i programed my ace v3 with a corona ace file. I have soldered it to all the points needed but it glitches but wont boot. It flashes green a couple times then stops then continues. Ive doubled check to make sure nothing is shorting and i hope you guys can trust me that my soldering is good. I've tried multiple timing files with no success. Any help with be greatly appreciated.!