AWTalklol
Enthusiast
So I have done the muffin install but it just beeps, it has ecc written, and my postfix has a reading of 66 on 200k. All other points have continuity.There are no traces for post, however when I remove adapter the blue light comes on the matrix chip, a solid blue light. But when i disconnect power reconnect and test with multimeter it shows its connected at 66@200k. I have removed the nand headers for the time being until I can fix this problem. Here are pics of my install, its pretty solid.
UPDATE#1:Writing back stock nand to see if it boots, nand still functions.might be a short.
UPDATE#2:Removed all wires, rewrote stock nand, Green light then, rlod, ... Wondering what I did wrong.
UPDATE#1:Writing back stock nand to see if it boots, nand still functions.might be a short.
UPDATE#2:Removed all wires, rewrote stock nand, Green light then, rlod, ... Wondering what I did wrong.
Last edited: