What's new

Solved xbox 360 bricked error e79 - please help

Rusver

Rusver

Newbie
Messages
9
Reaction score
0
Points
20
hi everyone i have rgh xbox...
i tried to update to last dushboard via youtube video, I did everything and now the xbox lunched for 2 sec and then the red ring shows up with e79 error. i build udpflash via xebuild and flashdump.
xell works, i have cpu key and dvd key, i tried again to build another nand but its not working...
i tried via 360 flash tool... please help me.
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,384
Reaction score
4,640
Points
2,315
hi everyone i have rgh xbox...
i tried to update to last dushboard via youtube video, I did everything and now the xbox lunched for 2 sec and then the red ring shows up with e79 error. i build udpflash via xebuild and flashdump.
xell works, i have cpu key and dvd key, i tried again to build another nand but its not working...
i tried via 360 flash tool... please help me.
What motherboard is it?
 
Rusver

Rusver

Newbie
Messages
9
Reaction score
0
Points
20
So your flashdmp.bin is 16MB?
What program on your Xbox did you use to read the nand?

Was it Flash360 or Simple 360 Nand Flasher?

simple 360 nand flasher

Code:
Simple 360 NAND Flasher by Swizzy v1.4b (BETA)

 * Detecting NAND Type...
 * Detected RAW NAND device!
 * Entering NAND Mode...

 * Attempting to grab CPUKey...
 * CPUKey sucessfully saved to: game:\cpukey.txt

============= Console information: =============

Current Dashboard: 2.0.16747.0
Current DashLaunch version: 3.12 (548)
Your CPUKey is: 

================================================

 * Looking for simpleflasher.cmd for automatic features...
game:\simpleflasher.cmd NOT Found!
 * Entering Manual mode!

Press X if you want to dump your nand with Rawdump v1
If you press anything else the application will close...
   config register     = 431C4
   sfc:page_sz         = 200
   sfc:meta_sz         = 10
   sfc:page_sz_phys    = 210
   sfc:pages_in_block  = 20
   sfc:block_sz        = 4000
   sfc:block_sz_phys   = 4200
   sfc:size_mb         = 16MB
   sfc:size_bytes      = 1000000
   sfc:size_bytes_phys = 1080000
   sfc:size_pages      = 8000
   sfc:size_blocks     = 400

 * rawdump v1 started (by Swizzy)
game:\flashdmp.bin opened OK, attempting to read 0x1080000 bytes from flash...

 ! SFCX: Bad block found at 0x282

block 0x282 seems bad, status 0x350

 ! SFCX: Bad block found at 0x283

block 0x283 seems bad, status 0x350

 ! SFCX: Bad block found at 0x305

block 0x305 seems bad, status 0x350



NAND Dumped! :D
Completed after 28.00 seconds
Press any button to exit!
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,384
Reaction score
4,640
Points
2,315
simple 360 nand flasher

Code:
Simple 360 NAND Flasher by Swizzy v1.4b (BETA)

 * Detecting NAND Type...
 * Detected RAW NAND device!
 * Entering NAND Mode...

 * Attempting to grab CPUKey...
 * CPUKey sucessfully saved to: game:\cpukey.txt

============= Console information: =============

Current Dashboard: 2.0.16747.0
Current DashLaunch version: 3.12 (548)
Your CPUKey is:

================================================

 * Looking for simpleflasher.cmd for automatic features...
game:\simpleflasher.cmd NOT Found!
 * Entering Manual mode!

Press X if you want to dump your nand with Rawdump v1
If you press anything else the application will close...
   config register     = 431C4
   sfc:page_sz         = 200
   sfc:meta_sz         = 10
   sfc:page_sz_phys    = 210
   sfc:pages_in_block  = 20
   sfc:block_sz        = 4000
   sfc:block_sz_phys   = 4200
   sfc:size_mb         = 16MB
   sfc:size_bytes      = 1000000
   sfc:size_bytes_phys = 1080000
   sfc:size_pages      = 8000
   sfc:size_blocks     = 400

 * rawdump v1 started (by Swizzy)
game:\flashdmp.bin opened OK, attempting to read 0x1080000 bytes from flash...

 ! SFCX: Bad block found at 0x282

block 0x282 seems bad, status 0x350

 ! SFCX: Bad block found at 0x283

block 0x283 seems bad, status 0x350

 ! SFCX: Bad block found at 0x305

block 0x305 seems bad, status 0x350



NAND Dumped! :D
Completed after 28.00 seconds
Press any button to exit!
Okay, so then it's a 16MB Nand.

All you'd have to do is get your flashdmp.bin, create the new 17511 XeBuild Image, save it as updflash.bin on the root of your USB, plug it into the console and boot into Xell. It'll flash it for you after it detects the file.
 
Rusver

Rusver

Newbie
Messages
9
Reaction score
0
Points
20
Okay, so then it's a 16MB Nand.

All you'd have to do is get your flashdmp.bin, create the new 17511 XeBuild Image, save it as updflash.bin on the root of your USB, plug it into the console and boot into Xell. It'll flash it for you after it detects the file.

I tried it many times and it didnt worked...
can I get your skype? Ill send you screenshots? maybe Im doing something wrong..
Im using xeBuild GUI 2.098...
and its gives me to do only to last kerenal version (2.0.17502.0)
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,384
Reaction score
4,640
Points
2,315
I tried it many times and it didnt worked...
can I get your skype? Ill send you screenshots? maybe Im doing something wrong..
Im using xeBuild GUI 2.098...
and its gives me to do only to last kerenal version (2.0.17502.0)
I've written a guide here:
https://www.se7ensins.com/forums/threads/how-to-update-your-rgh-jtag-to-17511.1385131/

Download the XeBuild at the top of the post.
Start at Step 5 - Stop at Step 13.

Once you have your updflash.bin, reply back to me here.
 
Rusver

Rusver

Newbie
Messages
9
Reaction score
0
Points
20
I've written a guide here:
https://www.se7ensins.com/forums/threads/how-to-update-your-rgh-jtag-to-17511.1385131/

Download the XeBuild at the top of the post.
Start at Step 5 - Stop at Step 13.

Once you have you're updflash.bin, reply back to me here.
now I see that i didn't deleted the Current Launch.ini...
at step 11 it shows me error:
szhhde.jpg

https://1drv.ms/i/s!AmphPLs_NeyBiJwWvjmLBpgts4IvMA
 
Rusver

Rusver

Newbie
Messages
9
Reaction score
0
Points
20
Hit generate hacked image again, and see what it says/does.
i tried million times, it does nothing... i clicked the DOWNLOAD/INSTALL Dashfiles also and its give me this error:
"checksum doesn't match, do you want do delete the current file?"
Code:
There was an error during the download:

System.Net.WebException: The remote server returned an error: (403) Forbidden.
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.WebClient.GetWebResponse(WebRequest request, IAsyncResult result)
   at System.Net.WebClient.DownloadBitsResponseCallback(IAsyncResult result)
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,384
Reaction score
4,640
Points
2,315
i tried million times, it does nothing... i clicked the DOWNLOAD/INSTALL Dashfiles also and its give me this error:
"checksum doesn't match, do you want do delete the current file?"
Code:
There was an error during the download:

System.Net.WebException: The remote server returned an error: (403) Forbidden.
   at System.Net.HttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
   at System.Net.WebClient.GetWebResponse(WebRequest request, IAsyncResult result)
   at System.Net.WebClient.DownloadBitsResponseCallback(IAsyncResult result)
Interesting.

If you want, you can upload your flashdmp.bin and CPU Key to Mediafire and PM me it - I can create the new image for you.
 
Noobert

Noobert

RGH/Flashing Support
VIP
Retired
Trifecta Scaling the Mountain Mythical Veteran
Messages
8,384
Reaction score
4,640
Points
2,315
Just replied back.

So now, take that updflash.bin, put it on the root of a USB Flash Drive, plug it into the console and boot into Xell.

Once it loads all the way, it'll tell you some message like - Power down now if you don't want to flash nand.

Don't touch anything. Let it flash the new nand.
 

Similar threads

Top Bottom
Login
Register