X360 Ace V4.1 issues and questions

Discussion in 'Xbox 360 Support Archive' started by a154james, Sep 13, 2018 with 16 replies and 2,489 views.

  1. a154james

    a154james Newbie

    Messages:
    4
    Ratings:
    0
    Hey guys,
    I just got my J-Runner and my x360 ACE v4.1 and im trying to RGH my trinity console. I already connected the J-Runner to the nand and read the nand and have thag saved. I wired in the ACE chip and was going to write trinity files to it but i have no idea what files to write. I can only find timing files for the old V3 chips and even then JRunner pops out a “Xilinx not detected error”

    These new V4.1 chips have very little info online and I’m just looking for some guidance on what to do here since this is my first RGH.

     
  2. rynax

    rynax Enthusiast

    Messages:
    163
    Ratings:
    9
    V4 OR 4.1 are cost cut down result, no programing, no file, you stuk with what it comes with.

    Better buy v3 next time.
     
  3. OP
    a154james

    a154james Newbie

    Messages:
    4
    Ratings:
    0
    Ahhh that makes senss then, I just ordered a coolrunner since They were on amazon, thanks!
     
  4. SirREDz

    SirREDz Newbie

    Messages:
    7
    Ratings:
    3
    I also purchased and received my V4 (Cafe Version) and I can't find anything online about programming them. I am assuming them come with code for Corona as does the V3 (I have never used), but I would assume the V4 is programmed using the V3 files, it's just a different physical chip to reduce costs *and the related circuit changes required to support the new chip*. It would make sense to me that is why you and I can't find anything other then the new wiring points for them.

    It might just be a matter of time for the V4 files to be released, or made public. Since my CPLD programmer cable broke, I can't program and test just yet.... Waiting on China Post :smile:

    [-=SrZ=-]
     
  5. rynax

    rynax Enthusiast

    Messages:
    163
    Ratings:
    9
    v4 is a clone of the stone chip
     
  6. OP
    a154james

    a154james Newbie

    Messages:
    4
    Ratings:
    0
    If that's the case is there any way to flash them with timing files for specific consoles or is it done a different way than through JRunner? Seems weird they sell them as "corona and trinity" and it doesn't work on a trinity/

    I already have a coolrunner installed in my Trinity and it works fine, but I have some other consoles I'd like RGH'd and it would be nice to be able to use these chips I have laying around.
     
  7. Newsk

    Newsk Getting There

    Messages:
    2,440
    Ratings:
    313
    Seems like the timing for trinity's is just garbage . We could figure out exact lengths etc. To get them booting more consistantly on trinity's but is about it. But why bother when we still have acev2,v3. Stone chips sucked back then and still suck now lol.
    It's highly unlikely we would ever see timings for these chips . 15432 gave that up years are ago.
     
    Last edited: Sep 19, 2018
  8. FSDADFSDFSFDS

    FSDADFSDFSFDS Newbie

    Messages:
    13
    Ratings:
    2
    I don't know what I'm talking about but doesn't it have pins on the left side so you can program it though?
    [​IMG]
     
  9. rynax

    rynax Enthusiast

    Messages:
    163
    Ratings:
    9
    Problem is we don't know what that chip is, and, x360ace/stone team have never released any files.
     
  10. FSDADFSDFSFDS

    FSDADFSDFSFDS Newbie

    Messages:
    13
    Ratings:
    2
    Oof, have they announced anything of when they're releasing it or has anyone tried contacting them about it? I can't find any contact emails or anything on their site.

    Edit: Used WHOIS to get the registration information for their website and the email used to register it is: menghai@gmail.com
     
    Last edited: Sep 20, 2018
  11. SirREDz

    SirREDz Newbie

    Messages:
    7
    Ratings:
    3
    I have Ace v4 and V4.1 and I am unable to program using nand-x, which programs CR3 lite minutes before no issue.

    Hoping for some answers soon!

    [-=SrZ=-]
     
  12. rynax

    rynax Enthusiast

    Messages:
    163
    Ratings:
    9
    JR Programmer can only program some chips, not all the chips you found on the market
     
  13. BIGmafiaGAMING

    BIGmafiaGAMING Newbie

    Messages:
    3
    Ratings:
    0
    I put my v4.1 on my corona 4gb and it just glitches for hours. I have no idea what’s up with them!
     
  14. FSDADFSDFSFDS

    FSDADFSDFSFDS Newbie

    Messages:
    13
    Ratings:
    2
    Probably a bad connection with the RST joint? Post pictures
     
  15. BIGmafiaGAMING

    BIGmafiaGAMING Newbie

    Messages:
    3
    Ratings:
    0
    Probably that or I wrote a bad ecc. I have a donor nand but I’m not 100% sure how to go about the swap.
     
  16. Newsk

    Newsk Getting There

    Messages:
    2,440
    Ratings:
    313
    Post some pics. So far I haven't had a single issue with them and coronas.

    Why the donor nand?
     
  17. BIGmafiaGAMING

    BIGmafiaGAMING Newbie

    Messages:
    3
    Ratings:
    0
    I guess I wrote a bad ecc to the console. I tried writing a nand from a console I did the same day that worked fine. The issue wasn’t in the ace. I put it on another console and booted in 1 glitch
     

Share This Page