Would this cable work for Jtag?

Discussion in 'Xbox 360 Support Archive' started by Unlovable Panda, Feb 6, 2010 with 3 replies and 611 views.

Thread Status:
Not open for further replies.
  1. Unlovable Panda

    Unlovable Panda A zonkey

    Messages:
    1,082
    Ratings:
    87
    I just got this cable because I was going to do the jtag hack but im looking at pictures of peoples Jtag's and they have cables with a Ethernet cord on it. this is the cable i got from ebay.


    [​IMG]

    This is the link of the ebay auction that i got it off of.

    [Click here to view the link]

    Thanks
     
  2. yermommy

    yermommy Enthusiast

    Messages:
    498
    Ratings:
    30
    yes, but make sure to keep it under 2 feet for optimal performance
     
    • Like Like x 1
  3. OP
    Unlovable Panda

    Unlovable Panda A zonkey

    Messages:
    1,082
    Ratings:
    87
    Thanks!

    Sorry one more thing, how would I cut it? if i cut it do I have to solder the 2 wires back together? cause if i cut it there will be 2 cable.
     
  4. iGotTheSmores

    iGotTheSmores Enthusiast

    Messages:
    515
    Ratings:
    56
    Well if it is a male to male cable the cut it in half. I find it easiest to get a DB25 male connector and make your cable with that and wire from Ethernet or another source.
     
Thread Status:
Not open for further replies.