What's new

Solved when my matrix glitcher is connected the console will not power on(solder points are done correctly)

V

vstar950

Newbie
Messages
60
Reaction score
0
what will unsoldering the c do? i rewrote my retail nand now it is booting like retail. of course. the jr programmer is staying red now. now i have to reprogram that i am guessing.
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
what will unsoldering the c do? i rewrote my retail nand now it is booting like retail. of course. the jr programmer is staying red now. now i have to reprogram that i am guessing.
The Chip Has A Oscillator And Console Has One As Well Basically.

So Both Are Crashing Together, You Can Either Unsolder C Point Which Is Stby_Clk Or Disable The Oscillator From The Chip To Use The One From The Console.
 
V

vstar950

Newbie
Messages
60
Reaction score
0
So when i desolder c. What should i expect to happen? Also not to bother you more. But how do i finish this up without having more issues? Is there a video you recommend? Btw. Thank you for your input. I will keep in touch through this if that is ok.
 
V

vstar950

Newbie
Messages
60
Reaction score
0
Btw i have jr programmer v2 and matrix glitcher v3 falcon board. Thanks again
 
Top Bottom