What's new

Solved what kid of soldering iron do i need?

  • Thread starter tylerBM182
  • Start date
  • Views 413
T

tylerBM182

Enthusiast
Messages
473
Reaction score
10
what watt? i would like to mod my xbox 360 controller
im going to be installing leds and the mod chip.. which do i neeD?
 
The Fuzz

The Fuzz

Enthusiast
Messages
604
Reaction score
46
15-30 watt. Low is usually better, especially if you don't know what you're doing. Good luck.
 
Smell

Smell

Getting There
Messages
1,896
Reaction score
230
Check out radio shack, thats were I got mine.
 
J

Jtag4Fun

Getting There
Messages
2,025
Reaction score
83
Cheap radioshack one would do for that. I would suggest a 15 watt. Also I would suggest practicing on scrap pcbs(broken remotes, broken electronics) and make sure you are good enough at soldering before you solder on your xbox.
 
T

tylerBM182

Enthusiast
Messages
473
Reaction score
10
Cheap radioshack one would do for that. I would suggest a 15 watt. Also I would suggest practicing on scrap pcbs(broken remotes, broken electronics) and make sure you are good enough at soldering before you solder on your xbox.

what else do i need to mod my controller besides the screwdrivers and the mod chip?
 
Top Bottom