S
Straighthate
Enthusiast
~[TuT]~Invisible Barriers
In this tutorial we will be editing a Fusion Coil into an invisible barrier.
Follow these steps to find out how.
First you will need a Halo 3 modding program in this tutorial I will be using
Forge 2.6 so download it here
http://www.se7ensins.com/forums/halo-3-modding-programs/101200-release-forge-2-6-a.html
Make sure you know how to get your map off of your HDD.
If you don't know how to get usermaps off of your HDD then read a tutorial how here.
http://forums.halomods.com/viewtopic.php?t=78492
Go in game and place a Fusion Coil where you want it to be.
Note: If the spawn point is facing north than the barrier will be running east and west. Same vise versa.
Here is an example of the spawn point for the fusion coil. (Blow it up to find out)
With the fusion coil placed where you want the barrier to be save teh map, and get it off of your HDD.
Start up Forge 2.6, and you should see a screen like this.
Open your Usermap that you extracted from you HDD.
Once loaded you'll see something like this.
Look to the right and select bloc, click it.
You shouldn't have to scroll down but you should be able to see something like
objects\gear\human\military\fusion_coil\_fusion_coil
Select it and go over to the right, hit the drop down box that says
objects\gear\human\military\fusion_coil\_fusion_coil
and scroll down till you see
objects\multi\wall_xl\wall_xl\
Select it and hit save to the right.
Now your done with the modding part! We can not hit Tools(at teh top) and Resign All.
Transfer your map back to your HDD and see if it worked!!!
Hehe Don't Forget your manners if this helped.
=)
xD
In this tutorial we will be editing a Fusion Coil into an invisible barrier.
Follow these steps to find out how.
First you will need a Halo 3 modding program in this tutorial I will be using
Forge 2.6 so download it here
http://www.se7ensins.com/forums/halo-3-modding-programs/101200-release-forge-2-6-a.html
Make sure you know how to get your map off of your HDD.
If you don't know how to get usermaps off of your HDD then read a tutorial how here.
http://forums.halomods.com/viewtopic.php?t=78492
Go in game and place a Fusion Coil where you want it to be.
Note: If the spawn point is facing north than the barrier will be running east and west. Same vise versa.
Here is an example of the spawn point for the fusion coil. (Blow it up to find out)
With the fusion coil placed where you want the barrier to be save teh map, and get it off of your HDD.
Start up Forge 2.6, and you should see a screen like this.
Open your Usermap that you extracted from you HDD.
Once loaded you'll see something like this.
Look to the right and select bloc, click it.
You shouldn't have to scroll down but you should be able to see something like
objects\gear\human\military\fusion_coil\_fusion_coil
Select it and go over to the right, hit the drop down box that says
objects\gear\human\military\fusion_coil\_fusion_coil
and scroll down till you see
objects\multi\wall_xl\wall_xl\
Select it and hit save to the right.
Now your done with the modding part! We can not hit Tools(at teh top) and Resign All.
Transfer your map back to your HDD and see if it worked!!!
Hehe Don't Forget your manners if this helped.
=)
xD