What's new

Tutorial [TUT] How to correctly burn XGD3 games

  • Thread starter Nitro EH
  • Start date
  • Views 384,092
zombiekiller786

zombiekiller786

Enthusiast
Messages
67
Reaction score
4
Points
55
Sin$
0
I burn using these setting I'm using verbatims but whenever I install my backup to Hard drive it stops at 50% when I install xgd2 games it installs perfectly please help
 
B

boogiemantcb

Newbie
Messages
8
Reaction score
1
Points
45
Sin$
-7
Probably because there were too many pops and glitches so to speak in the burn. You should run all burns through kprobe2 a program that will tell you how clean your burn was. There are 2 values it tells you lower the numbers better quality. Supposedly burns with high levels can cause a ban if you play online! Check your burner settings there is a good tut on seven sins that will tell you the numbers you want and the settings u want on and off. Also always clear the cache before each burn.
 
A

Andyyyy111

Newbie
Messages
5
Reaction score
0
Points
35
Sin$
7
Hello, I followed the tutorial and I've successfully burned an XDG3 game at 100% with MKM03 Verbatim, but I forgot to patch the ISO with abgx360, so when I put it in the xbox, game is not showing, just "Play Game" icon, when I press it, nothing happened.

So, next try - I've patched with abgx with the abgx tutorial (auto fix level 3 settings) etc, and repeated everything like my first burn, but this time on 45% i got I/O error in Imgburn WAITING BUFFERS TO RECOVER..... a couple of times and than ADDRESS WRITE ERROR and stopped.

Third burn, used MKM1 settings on my MKM3 - 2.4x speed, OPC disabled, And at 60% it just stopped with the address write error. I'v using [Optiarc DVD RW AD-7580S FX20] with Burner max enabled and Imgburn ver. 2.5.1.0
I've checked in win explorer what's burned on my first and only successful burn (as i said at first) and it says only 13mb of data? AUDIO_TS is empty and VIDEO_TS is 2MB??? Maybe this is because the Xbox cannot recognize it's a game and there is no game icon and Play Game click does nothing, than why it burned 8,7GB of data??

I've never had problem with XGD2 games.

Please, help, I would like to burn and play a game.:frown: Or I should just go for the 97% burn and called it a day? Probably my Optiarc drive just can't overburn it. That's it, I guess I'll just play games with 97%.
 
Last edited:
Evaldas Tervilys

Evaldas Tervilys

Getting There
Messages
1,178
Reaction score
175
Points
210
Sin$
7
Hello, I followed the tutorial and I've successfully burned an XDG3 game at 100% with MKM03 Verbatim, but I forgot to patch the ISO with abgx360, so when I put it in the xbox, game is not showing, just "Play Game" icon, when I press it, nothing happened.

So, next try - I've patched with abgx with the abgx tutorial (auto fix level 3 settings) etc, and repeated everything like my first burn, but this time on 45% i got I/O error in Imgburn WAITING BUFFERS TO RECOVER..... a couple of times and than ADDRESS WRITE ERROR and stopped.

Third burn, used MKM1 settings on my MKM3 - 2.4x speed, OPC disabled, And at 60% it just stopped with the address write error. I'v using [Optiarc DVD RW AD-7580S FX20] with Burner max enabled and Imgburn ver. 2.5.1.0
I've checked in win explorer what's burned on my first and only successful burn (as i said at first) and it says only 13mb of data? AUDIO_TS is empty and VIDEO_TS is 2MB??? Maybe this is because the Xbox cannot recognize it's a game and there is no game icon and Play Game click does nothing, than why it burned 8,7GB of data??

I've never had problem with XGD2 games.

Please, help, I would like to burn and play a game.:frown: Or I should just go for the 97% burn and called it a day? Probably my Optiarc drive just can't overburn it. That's it, I guess I'll just play games with 97%.
Your Pc disc burner is broken dude its nothing about settings some times it's works some times it's doesn't
 
A

Andyyyy111

Newbie
Messages
5
Reaction score
0
Points
35
Sin$
7
It's clearly not broken. I just can't burn 8.7GB. That's it. I've burned a couple of XDG2 games yesterday and they work and play perfect. Made a try on my other Sony Vaio notebook, still the same result. Disc burners are in perfect condition. Still can'f figure out how to burn XDG3 with the 97% method and truncate burn. I'm getting error in IMGburn- Set L0 Data Zone Capacity Failed! - Reason: Invalid Field in Parameter List, but it's a successful burn. My Xbox shows "Play Game" Icon, when I press it, goes to black and than back do dashboard. I'v ran it through abgx360 twice and all is green. I think I will try that Iso2God thing.
 
B

boogiemantcb

Newbie
Messages
8
Reaction score
1
Points
45
Sin$
-7
So i have been burning backups for over a year never had a problem. I tried burning destiny but when i downloaded it had the game in rar form. when i extract it opens a folder with Audio-Ts, Video-TS, and some .xex file oh and a .dvd that you would use to start burn in imgburn. I burned the disc and it succeeded but when i koaded it into my xbox it frooze at spinning circle. I put in a retil game and a burned game i know works and they all froze. So i threw out the xbox and decided to give it one last try and now it works although i dont know if destiny game will work. never seen a download file like that before. Comments said that it works fine just like a normal iso. i dont get it. please help 
Are you using burnermax to extend ability to burn from 8.5 gig to 8.7 gig
 
S

StreppyD

Newbie
Messages
17
Reaction score
0
Points
35
Sin$
7
If you guys are positive that your settings and drives are fine, then its probably the file you downloaded. Yes, even if you check comments and they say its working fine, that means the file that was uploaded is good, but its possible that YOUR download has an error, especially with torrents since you can pause etc. Try downloading again and see if it works
 
H

Hcazs4

Enthusiast
Messages
43
Reaction score
5
Points
55
Sin$
0
My old ASUS drive was starting to get worse and worse burns. This is my 3rd burn with my new iHas 524b and IT'S ****ING AMAZING! Thanks for the settings!
Vugriqi.png
 
O

oldpot

Newbie
Messages
13
Reaction score
0
Points
35
Sin$
0
new drive today
Ok here is the stats
ASUS DRW-24B1ST (i) 1.00 (ATA)
burnt 2 xgd2 games burnt good , nero discspeed gave both 95/97%
now tried 1 xgd3 game with setting from this tut, pass burnermax ok
and did the patched enabled,
no errors while burning looked like it burnt ok,
got results from nero disc speed

pi av 75.58
max 211
tot 2519226

pif.av 0.12
max 12
total 32937

45% now that does not look right?? right?
what can i do to make that better and can i play with this disc , disc does work in the drive(will not be
going on xbl only to sign in as got to , to save the game but not got xbl gold so will not be going on there )
this is my first time i ever burnt a xgd3 game?.
here is the my log for the burn.

;
I 13:18:15 ImgBurn Version 2.5.8.0 started!
I 13:18:15 Microsoft Windows 7 Ultimate Edition (6.1, Build 7601 : Service Pack 1)
I 13:18:15 Total Physical Memory: 3,406,004 KiB - Available: 2,257,412 KiB
I 13:18:15 Initialising SPTI...
I 13:18:15 Searching for SCSI / ATAPI devices...
I 13:18:15 -> Drive 1 - Info: ASUS DRW-24B1ST i 1.00 (D
icon_e_smile.gif
(ATA)
I 13:18:15 Found 1 DVD±RW/RAM!
I 13:26:29 Operation Started!
I 13:26:29 Source File: E:\Forza.dvd
I 13:26:29 Source File Sectors: 4,267,015 (MODE1/2048)
I 13:26:29 Source File Size: 8,738,846,720 bytes
I 13:26:29 Source File Volume Identifier: DVD_ROM
I 13:26:29 Source File Volume Set Identifier: d8434000MS UDFBridge
I 13:26:29 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 13:26:29 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 13:26:29 Source File File System(s): ISO9660, UDF (1.50)
I 13:26:29 Destination Device: [3:1:0] ASUS DRW-24B1ST i 1.00 (D
icon_e_smile.gif
(ATA)
I 13:26:29 Destination Media Type: DVD+R DL (Disc ID: MKM-001-00)
I 13:26:29 Destination Media Supported Write Speeds: 2.4x, 4x, 6x, 8x
I 13:26:29 Destination Media Sectors: 4,267,040
I 13:26:29 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes)
I 13:26:29 Write Mode: DVD
I 13:26:29 Write Type: DAO
I 13:26:29 Write Speed: 2.4x
I 13:26:29 DVD+R DL Reserve Track: No
I 13:26:29 Link Size: Auto
I 13:26:29 Lock Volume: Yes
I 13:26:29 Test Mode: No
I 13:26:29 OPC: No
I 13:26:29 BURN-Proof: Disabled
I 13:26:29 Write Speed Successfully Set! - Effective: 3,324 KB/s (2.4x)
I 13:26:29 Book Type Setting: N/A (Reason: Invalid Field in CDB)
I 13:26:29 Advanced Settings - Force HT: Yes, Online HT: Yes, OverSpeed: Yes, SmartBurn: Yes
I 13:26:29 CD/DVD Life Record Count: 2 - CD/DVD Record Count: 2
I 13:26:29 Optimal L0 Data Zone Capacity: 2,133,520
I 13:26:29 Optimal L0 Data Zone Method: Copied From Original Disc
I 13:26:29 Set L0 Data Zone Capacity Succeeded!
I 13:26:29 L0 Data Zone Capacity - Effective: 2,133,520
I 13:26:30 Filling Buffer... (513 MiB)
I 13:26:35 Writing LeadIn...
I 13:27:07 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 13:27:07 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 13:27:07 Writing Layer 0... (LBA: 0 - 2133519)
I 13:48:56 Writing Layer 1... (LBA: 2133520 - 4267014)
I 14:10:48 Synchronising Cache...
I 14:10:52 Closing Track...
I 14:10:53 Finalising Disc...
I 14:11:45 Exporting Graph Data...
I 14:11:45 Graph Data File: C:\Users\Administrator\AppData\Roaming\ImgBurn\Gra ph Data Files\ASUS_DRW-24B1ST_i_1.00_SATURDAY-OCTOBER-18-2014_1-26_PM_MKM-001-00_2.4x.ibg
I 14:11:45 Export Successfully Completed!
I 14:11:45 Operation Successfully Completed! - Duration: 00:45:16
I 14:11:45 Average Write Rate: 3,257 KiB/s (2.4x) - Maximum Write Rate: 3,317 KiB/s (2.5x)
I 14:13:19 Close Request Acknowledged
I 14:13:19 Closing Down...
I 14:13:19 Shutting down SPTI...
I 14:13:19 ImgBurn closed!
 
As an eBay Associate we earn from qualifying purchases.
mightyXboxGuy

mightyXboxGuy

Newbie
Messages
6
Reaction score
0
Points
35
Sin$
7
Hi. I am burning my second xgd3 now. Its nba 2k15. The first was not successful. Drive is slimtype DVD A DS8A5SH. Laptop samsung rc710. Using burnermax payload tool 0.15. Writing layer 1. Did all the instructions.
Is there any ideas why gta V disc 2 didnt burn? Tryed overburn and trunscate or whatever. Showed image and didnt launch. Disc 1 files on usb. A bit too long. Please help. Have ltu 3.0 zephyr. Will report how nba burnt
 
A

Aqeel98

Newbie
Messages
23
Reaction score
0
Points
35
Sin$
7
Hi
I need some help. I was burning my first xdg3 which is advance warfare on verbatim disks. it all burned fine but it does not read and when I tried verify it failed. the log is below.
I 15:02:47 ImgBurn Version 2.5.8.0 started!
I 15:02:47 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 15:02:47 Total Physical Memory: 8,369,368 KiB - Available: 6,200,828 KiB
I 15:02:47 Initialising SPTI...
I 15:02:47 Searching for SCSI / ATAPI devices...
I 15:02:47 -> Drive 1 - Info: PIONEER DVD-RW DVR-219L 1.01 (F:smile: (SATA)
I 15:02:47 Found 1 DVD±RW/RAM!
I 15:04:53 Operation Started!
I 15:04:53 Source File: W:\GAMES\aw\Call.Of.Duty.Advanced.Warfare.XBOX360-iMARS\DVD1\imars.codaw.360a.dvd
I 15:04:53 Source File Sectors: 4,267,015 (MODE1/2048)
I 15:04:53 Source File Size: 8,738,846,720 bytes
I 15:04:53 Source File Volume Identifier: DVD_ROM
I 15:04:53 Source File Volume Set Identifier: fb118000MS UDFBridge
I 15:04:53 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 15:04:53 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 15:04:53 Source File File System(s): ISO9660, UDF (1.50)
I 15:04:53 Destination Device: [0:0:0] PIONEER DVD-RW DVR-219L 1.01 (F:smile: (SATA)
I 15:04:53 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 15:04:53 Destination Media Supported Write Speeds: 4x, 6x, 8x, 10x
I 15:04:53 Destination Media Sectors: 4,267,040
I 15:04:53 Destination Media L0 Data Zone Capacity: 2,133,520 (Changeable: Yes)
I 15:04:53 Write Mode: DVD
I 15:04:53 Write Type: DAO
I 15:04:53 Write Speed: 4x
I 15:04:53 DVD+R DL Reserve Track: No
I 15:04:53 Link Size: Auto
I 15:04:53 Lock Volume: Yes
I 15:04:53 Test Mode: No
I 15:04:53 OPC: Yes
I 15:04:53 BURN-Proof: Disabled
I 15:04:55 Write Speed Successfully Set! - Effective: 5,540 KB/s (4x)
I 15:04:55 Book Type Setting: DVD-ROM
I 15:04:55 Advanced Settings - Optimal Writing Speed: No
I 15:05:19 Optimal L0 Data Zone Capacity: 2,133,520
I 15:05:19 Optimal L0 Data Zone Method: Copied From Original Disc
I 15:05:19 Set L0 Data Zone Capacity Succeeded!
I 15:05:19 L0 Data Zone Capacity - Effective: 2,133,520
I 15:05:20 Filling Buffer... (512 MiB)
I 15:05:25 Writing LeadIn...
I 15:05:32 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 15:05:32 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 15:05:32 Writing Layer 0... (LBA: 0 - 2133519)
I 15:18:54 Writing Layer 1... (LBA: 2133520 - 4267014)
I 15:32:26 Synchronising Cache...
I 15:32:30 Closing Track...
I 15:32:32 Finalising Disc...
I 15:33:26 Exporting Graph Data...
I 15:33:26 Graph Data File: C:\Users\aqeel\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-219L_1.01_30-OCTOBER-2014_15-04_MKM-003-00_4x.ibg
I 15:33:26 Export Successfully Completed!
I 15:33:26 Operation Successfully Completed! - Duration: 00:28:32
I 15:33:26 Average Write Rate: 5,290 KiB/s (3.9x) - Maximum Write Rate: 5,488 KiB/s (4.1x)
I 15:33:26 Cycling Tray before Verify...
I 15:33:52 Device Ready!
I 15:33:53 Operation Started!
I 15:33:53 Source Device: [0:0:0] PIONEER DVD-RW DVR-219L 1.01 (F:smile: (SATA)
I 15:33:53 Source Media Type: DVD+R DL (Book Type: DVD-ROM) (Disc ID: MKM-003-00)
I 15:33:53 Source Media Supported Read Speeds: 12x
I 15:33:53 Source Media Supported Write Speeds: 4x, 6x, 8x, 10x
I 15:33:53 Source Media Sectors: 4,267,024 (Track Path: OTP - L0: 2,133,520 - L1: 2,133,504)
I 15:33:53 Source Media Size: 8,738,865,152 bytes
I 15:33:53 Image File: W:\GAMES\aw\Call.Of.Duty.Advanced.Warfare.XBOX360-iMARS\DVD1\imars.codaw.360a.dvd
I 15:33:53 Image File Sectors: 4,267,015 (MODE1/2048)
I 15:33:53 Image File Size: 8,738,846,720 bytes
I 15:33:53 Image File Volume Identifier: DVD_ROM
I 15:33:53 Image File Volume Set Identifier: fb118000MS UDFBridge
I 15:33:53 Image File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 15:33:53 Image File Implementation Identifier: Microsoft CDIMAGE UDF
I 15:33:53 Image File File System(s): ISO9660, UDF (1.50)
I 15:33:53 Read Speed (Data/Audio): MAX / MAX
I 15:33:54 Read Speed - Effective: 5x - 12x, 12x - 5x
I 15:33:54 Verifying Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 15:33:54 Verifying Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 15:33:54 Verifying Layer 0... (LBA: 0 - 2133519)
W 15:40:07 Failed to Read Sectors 2112480 - 2112511 - Reason: No Seek Complete
W 15:40:12 Failed to Read Sector 2112480 - Reason: No Seek Complete
W 15:40:20 Retrying (1)...
W 15:40:25 Retry Failed - Reason: No Seek Complete
W 15:40:46 Retrying (2)...
W 15:40:51 Retry Failed - Reason: No Seek Complete
W 15:41:08 Failed to Read Sector 2112480 - Reason: No Seek Complete
W 15:41:13 Failed to Read Sector 2112481 - Reason: No Seek Complete
W 15:41:23 Failed to Read Sector 2112482 - Reason: No Seek Complete
W 15:41:32 Failed to Read Sector 2112483 - Reason: No Seek Complete
E 15:41:34 Failed to Read Sector 2112483 - Reason: No Seek Complete
E 15:41:34 Failed to Verify Sectors!
I 15:41:35 Exporting Graph Data...
I 15:41:35 Graph Data File: C:\Users\aqeel\AppData\Roaming\ImgBurn\Graph Data Files\PIONEER_DVD-RW_DVR-219L_1.01_30-OCTOBER-2014_15-04_MKM-003-00_4x.ibg
I 15:41:35 Export Successfully Completed!
E 15:41:35 Operation Failed! - Duration: 00:07:41
I 15:41:35 Average Verify Rate: 9,184 KiB/s (6.8x) - Maximum Verify Rate: 16,359 KiB/s (12.1x)


I am not sure why this is happening but have followed the right instructions and have used burner max my drive is PIONEER S18LBK any help would be greatly appreciated thanks.
 
E

Emil M

Newbie
Messages
1
Reaction score
0
Points
35
Sin$
-7
Hi Guys,
I've tried to burn PES 2015 on my Samsung 222-bb DVD burner using MKM 03 Verbatims. However I'm getting one and the same problem - too high PI and PF on layer break (between the two layers). If I exclude those peak's the results are great. Any ideas how can I fix it?

I 10:11:59 ImgBurn Version 2.5.8.0 started!
I 10:11:59 Microsoft Windows 7 Ultimate x64 Edition (6.1, Build 7601 : Service Pack 1)
I 10:11:59 Total Physical Memory: 4 175 820 KiB - Available: 2 781 708 KiB
I 10:11:59 Initialising SPTI...
I 10:11:59 Searching for SCSI / ATAPI devices...
I 10:11:59 -> Drive 1 - Info: DTSOFT BDROM 1.05 (F:smile: (Virtual)
I 10:11:59 -> Drive 2 - Info: TSSTcorp CDDVDW SH-222BB SB00 (D:smile: (ATA)
I 10:11:59 Found 1 DVD±RW/RAM and 1 BD-ROM!
I 10:30:21 Operation Started!
I 10:30:21 Source File: C:\Users\BAMPY\Downloads\Pro.Evolution.Soccer.2015.PAL.XBOX360-COMPLEX\complex-pes2015.dvd
I 10:30:21 Source File Sectors: 4 267 015 (MODE1/2048)
I 10:30:21 Source File Size: 8 738 846 720 bytes
I 10:30:21 Source File Volume Identifier: DVD_ROM
I 10:30:21 Source File Volume Set Identifier: d0a7c000MS UDFBridge
I 10:30:21 Source File Application Identifier: CDIMAGE 2.45 (12/06/2000 TM)
I 10:30:21 Source File Implementation Identifier: Microsoft CDIMAGE UDF
I 10:30:21 Source File File System(s): ISO9660; UDF (1.50)
I 10:30:21 Destination Device: [1:0:0] TSSTcorp CDDVDW SH-222BB SB00 (D:smile: (ATA)
I 10:30:21 Destination Media Type: DVD+R DL (Disc ID: MKM-003-00)
I 10:30:21 Destination Media Supported Write Speeds: 4x; 6x; 8x
I 10:30:21 Destination Media Sectors: 4 267 040
I 10:30:21 Destination Media L0 Data Zone Capacity: 2 133 520 (Changeable: Yes)
I 10:30:21 Write Mode: DVD
I 10:30:21 Write Type: DAO
I 10:30:21 Write Speed: 2,4x
I 10:30:21 DVD+R DL Reserve Track: No
I 10:30:21 Link Size: Auto
I 10:30:21 Lock Volume: Yes
I 10:30:21 Test Mode: No
I 10:30:21 OPC: Yes
I 10:30:21 BURN-Proof: Disabled
W 10:30:21 Write Speed Miscompare! - Wanted: 3 324 KB/s (2,4x), Got: 5 540 KB/s (4x)
W 10:30:21 The drive only supports writing these discs at 4x; 6x; 8x.
I 10:30:21 Book Type Setting: DVD-ROM
I 10:30:52 Optimal L0 Data Zone Capacity: 2 133 520
I 10:30:52 Optimal L0 Data Zone Method: Copied From Original Disc
I 10:30:54 Set L0 Data Zone Capacity Succeeded!
I 10:30:54 L0 Data Zone Capacity - Effective: 2 133 520
I 10:30:55 Filling Buffer... (513 MiB)
I 10:30:59 Writing LeadIn...
I 10:31:01 Writing Session 1 of 1... (1 Track, LBA: 0 - 4267014)
I 10:31:01 Writing Track 1 of 1... (MODE1/2048, LBA: 0 - 4267014)
I 10:31:01 Writing Layer 0... (LBA: 0 - 2133519)
I 10:44:09 Writing Layer 1... (LBA: 2133520 - 4267014)
I 10:58:01 Synchronising Cache...
I 10:58:05 Closing Track...
I 10:58:07 Finalising Disc...
I 10:58:41 Exporting Graph Data...
I 10:58:41 Graph Data File: C:\Users\BAMPY\AppData\Roaming\ImgBurn\Graph Data Files\TSSTcorp_CDDVDW_SH-222BB_SB00_28-НОЕМВРИ-2014-Г-_10-30_MKM-003-00_2,4x.ibg
I 10:58:41 Export Successfully Completed!
I 10:58:41 Operation Successfully Completed! - Duration: 00:28:20
I 10:58:41 Average Write Rate: 5 271 KiB/s (3.9x) - Maximum Write Rate: 5 499 KiB/s (4.1x)
 
Burn_IT

Burn_IT

Newbie
Messages
12
Reaction score
1
Points
45
Sin$
7
Will this work on unmodified xbox?
I'm going to try this method out tomorrow. I'm coming from CFW 3.55 PS3 and i only had Xbox 360 for 2 days. What are the chances of being banned from Xbox live by using this method?
Also, I don't have Lite-On ihas b.

i have 3 different DVD drives that i could use, which one would work? which one would do the best job?
1) Hitachi GSA-H30L/LG
2) HP TS-L633
3) Mathsita UJDA775
 
Last edited:
S

shlomy223

Newbie
Messages
14
Reaction score
0
Points
35
Sin$
0
hey there i have a question about xbox 360 xgd2 and xgd3 burning games: tmy problem is like this xgd2

and xgd3 xbox games don't work properly on xbox 360 with

ltu2. it gives this error message:"the disc is not

supported".and the rest of the message is what i didn't

understand from your last reply.
what do you mean "pot tweaking with it"
i didn't understand this sentence and no i didn't try to

clean the laser
and again
the laser of what
if xbox got laser sensor or something like that where is it

and how can i do it?
i need to know more about ltu tweaks and how to use abgx

properly and image burner properly if you can help me
if you have links to guides that can help me with this

issue and the first issue of course the pot tweaking and

the laser
if you have guides it will be good.and btw if you have

guides that relevant and objective to this subject about

"solve problems with burning the games of xbox 360(for ltu

those who got ltu chip) so it would work properly on the

console".if the burner of mine
lite-on ihas l408 e type is compatible with it and don't

need any updates or upgrades to the firmware
that means that it is necessary to copy newer files than

before so it would be compatible with xgd3 and xgd2 and

other types.)
so that's it if you got more ways or questions for me you

can also send me a message to my
email address :[email protected]. waiting for your

response.
 
O

oscarandjo

Enthusiast
Messages
51
Reaction score
2
Points
55
Sin$
7
Will this work on unmodified xbox?
I'm going to try this method out tomorrow. I'm coming from CFW 3.55 PS3 and i only had Xbox 360 for 2 days. What are the chances of being banned from Xbox live by using this method?
Also, I don't have Lite-On ihas b.

i have 3 different DVD drives that i could use, which one would work? which one would do the best job?
1) Hitachi GSA-H30L/LG
2) HP TS-L633
3) Mathsita UJDA775
Since you don't have an iHASxxxB drive, you will have to use Burner Max - Burner Max 'unlocks' extra space on DVD+R DL discs so that you can burn newer XGD3 games, I advise you research this all more in depth. Burner Max patching works just as well as having an iHAS drive however BurnerMax doesn't support all drives and it will need to be done every time. There is a compatibility list for BurnerMax on the internet.

You will have to firmware flash your Xbox 360 DVD drive, there isn't a way to play backups without taking your console apart. There is a good guide here: http://www.se7ensins.com/forums/thr...im-burner-max-payload-burn-games◄◄▬█.1150969/
 
hassan el asri

hassan el asri

Newbie
Messages
1
Reaction score
0
Points
35
Sin$
0
hello everyone, I hope this is the right place and time for my question.
I'm new to burning games and i only burned one game so far (ufc undisputed 3) and it worked perfectly. Recently i tried to burn Fifa 16 following this guide but when i get to the part where i have to enable all except OverSpeed and clear OPC history in the lite on tab, it shows that force hypertuning and online hypertuning... they're all not suported. I also used burnermax an it was enabled with no problem. i don't have an ihas burner, my drive is: hp CDDVDW SN-208DB HH01
 
Top Bottom
Login
Register