What's new

Solved Trinity w/ Matrix Glitcher V3 refusing to glitch

0

0x77FFFFFFF

Enthusiast
Messages
45
Reaction score
6
Points
65
Sin$
7


Notes:

  • All solder points were cleaned with alcohol and acetone
  • No RRoD (or at least it has been resolved)
  • Double checked all wires
  • The resistor for the built in CLK has been removed
  • Console boots fine with stock NAND
  • Tried using the Matrix V3 in other consoles (2 other Falcons) and did not boot into Xell
  • I'm using a PC PSU instead of a Xbox 360 powerbrick

Proof this console no longer has the RRoD (with stock nand)

Anm3Ppe.jpg


slightly better wiring

EyktMMg.jpg
 
Last edited:
0

0x77FFFFFFF

Enthusiast
Messages
45
Reaction score
6
Points
65
Sin$
7
Last edited:
mikeasdlf12312

mikeasdlf12312

Enthusiast
Messages
74
Reaction score
1
Points
55
Sin$
7
I tried it with and without the bridge on every attempt and still no success.

Also the link for the second image is broken.

All pictures people have been sending you have that bridge removed if you check the old thread. Remove it and let it boot for 5 mins. Take power on and off and try again if it's not booting 
X360run doesn't need to be programmed and works great on trinity, I have one.
 
Top Bottom
Login
Register