What's new

Solved Trinity doesnt boot

Man1ak737

Man1ak737

Newbie
Messages
3
Reaction score
0
Points
20
Sin$
0
My brothers trinity screen went dark and after that it doesnt boot .just a clicking sound.it had a matrix glitcher chip and when i try to boot the console no LEDs lights up on the chip so i thought that the chip broke.so Ive installed ACE v5 chip.still no luck and non of the LEDs lights up on the chip.
 
Z

Zerker24

Enthusiast
Messages
945
Reaction score
206
Points
170
Sin$
0
If you have the original nand still, disable the mod chip and see if it will boot to the stock dash. If it does then there is an issue with the install. Unfortunately, your console may have a hardware issue now.
 
Man1ak737

Man1ak737

Newbie
Messages
3
Reaction score
0
Points
20
Sin$
0
If you have the original nand still, disable the mod chip and see if it will boot to the stock dash. If it does then there is an issue with the install. Unfortunately, your console may have a hardware issue now.
I dont have the original nand...is there anything else that i could do
 
Z

Zerker24

Enthusiast
Messages
945
Reaction score
206
Points
170
Sin$
0
I dont have the original nand...is there anything else that i could do
Well....

If both the lights are off then I don't think the chip is getting power. The light on the power brick isn't red is it?

Did it go dark while he was doing anything specific like writing the NAND?
 
Man1ak737

Man1ak737

Newbie
Messages
3
Reaction score
0
Points
20
Sin$
0
I measured with multimeter the 3.3v and gnd points.it shows 3.27v.it when dark while he was playing a game. The light on a brick is green while its booting
 
Last edited:
Top Bottom
Login
Register