What's new

Solved Swapping drives

J

Jtag4Fun

Getting There
Messages
2,025
Reaction score
83
Points
190
Sin$
0
Hey guys. I have a jtag that originally has a sammy drive. This drive is not working, but i have a full firmware dump for it. I also have a benq with 0800 firmware that i have been using for ripping games. how would i go about putting the benq in my jtag?
 
Fire30

Fire30

Seasoned Member
Messages
7,222
Reaction score
2,364
Points
635
Sin$
0
you could spoof the benq for the sammy, or you could change the dvd key, and dvd drive in the nand, to match the benq's
 
TeaRz

TeaRz

Getting There
Messages
1,632
Reaction score
241
Points
190
Sin$
0
1. Open the Samsung FW as source FW in JungleFlasher under Firmware Tool 32 tab.
2. Open a BenQ LT+ v1.1 FW as the target.
3. Click Spoof to target.
4. Hook up the BenQ drive to your PC.
5. Under MTK Flash 32 tab select BenQ Unlock.
6. Select Erase.
7. Select Write.
8. Select Outro/ATA Reset
Done! :biggrin:
 
J

Jtag4Fun

Getting There
Messages
2,025
Reaction score
83
Points
190
Sin$
0
1. Open the Samsung FW as source FW in JungleFlasher under Firmware Tool 32 tab.
2. Open a BenQ LT+ v1.1 FW as the target.
3. Click Spoof to target.
4. Hook up the BenQ drive to your PC.
5. Under MTK Flash 32 tab select BenQ Unlock.
6. Select Erase.
7. Select Write.
8. Select Outro/ATA Reset
Done! :biggrin:
:biggrin: Thanks Tears. plus rep for that. it was exactly what i was looking for.
 
Top Bottom
Login
Register