What's new
  • Howdy, Guest!

    We have issued a forced password reset on all user accounts, meaning you will not be able to login until this process is complete. Instructions will be displayed when you login with your previous credentials, however if for any reason you do not have access to your associated email address, you will need to contact us at [email protected].

    For more information, please read this Important Announcement

    Thank you for being awesome!

Question Slow, inconsistent Boot times Rgh1.2 jasper 16mb

FinalBoss_Retro

FinalBoss_Retro

Newbie
Messages
3
Reaction score
0
Points
35
Sin$
0
Hello
Ive recently picked up a jasper sb, and decided to Rgh it. Ive used a coolrunner rev c and everything has work as should. Console boots up great but just takes it time. Usually the console boots between 1 and 2 minutes, but every video i see the console boots up well within the 1st 3 glitches and well under 30 seconds. Ive tried changing timing files. Ive bridged 2-3 and j-p which seemed to help. I tried bridging the cap, which i didnt think we help much being a 16mb jasper but i tried it and it the coolrunner just flashes the gren super quick but doesn't boot. Ive tried to keep my wiring tidy, used 30awg wrapping wire for the points, expect gnd and 3.3v. Its my first rgh as ive lived with my jtag xenon for years now. Just could do with some help to get more consistent boots. If anyone could help or advise.

Please see photos of my install.






Thanks.
 
FinalBoss_Retro

FinalBoss_Retro

Newbie
Messages
3
Reaction score
0
Points
35
Sin$
0
Solved. The issue semmed to be when ever the Post and PLL wires cross or touched. Ive re ran them and bridged the cap. Now boots on 1st or 2nd glitch cycle everytime ? hope this helps anyone else in the furture.
 
Top Bottom
Login
Register