What's new

Hardware Mods Show your Jtag/ RGH installs & Opinions

  • Thread starter Rodent Modz
  • Start date
  • Views 28,773
Rodent Modz

Rodent Modz

Jtags/RGHs customized consoles
Seasoned Veteran 10th Anniversary Grizzled Veteran
Messages
1,143
Reaction score
456
Points
280
Sin$
0
I hear alot of members complaining about installs on RGh and Jtags
so figured i would post a pic of mine and maybe members will show there work also
I have been doing this work now for almost 7 years now
started out with repairs and then jtags and rgh's
when they came out
there are alot of good sellers out there and I see alot of there work
so thought i would share mine
and hope some others share photo's of there
and hopefully people will be honest and rate others work also
post pictures of your installs and the boot times of the consoles
So members can see your work
Please leave feedback
Thank you!

Matrix Glitcher V3 Corona V3
Boot times instant to 30 seconds

dmxy8m.jpg

 
Last edited:
D

Deleted member 777936

Houston, we have a problem.
Messages
2,252
Reaction score
1,259
Points
505
Sin$
0
So... the point of this thread is for us to post pictures of our installs and the boot times of the consoles for others to rate?
 
Rodent Modz

Rodent Modz

Jtags/RGHs customized consoles
Seasoned Veteran 10th Anniversary Grizzled Veteran
Messages
1,143
Reaction score
456
Points
280
Sin$
0
So... the point of this thread is for us to post pictures of our installs and the boot times of the consoles for others to rate?
yes that is what i kind of made this post i get alot of customers compairing my work with others and I get other sellers who come to me asking me the same thing we share or info with each other to help each other out when needed
 
NETO0214

NETO0214

Banned
Messages
903
Reaction score
185
Points
135
Sin$
0
This is a good idea u got here



6ED0CCCB-5F72-4269-ACC1-699C25B20883_zpsxruzcybu.jpg


Don't have recent photos of my phat installs but if this thread is still up I'll edit it and upload phat install and vid of it
 
Rodent Modz

Rodent Modz

Jtags/RGHs customized consoles
Seasoned Veteran 10th Anniversary Grizzled Veteran
Messages
1,143
Reaction score
456
Points
280
Sin$
0
This is a good idea u got here



6ED0CCCB-5F72-4269-ACC1-699C25B20883_zpsxruzcybu.jpg


Don't have recent photos of my phat installs but if this thread is still up I'll edit it and upload phat install and vid of it



Hoping this thread stays up wow I never thought of running the wires like you did since those points are a pain to bridge where the resistors are missing. nice work. good to see new ideas
 
Last edited:
HuskerHeaven

HuskerHeaven

when I took his glass of champagne...
Retired
Messages
8,249
Reaction score
3,370
Points
1,680
Sin$
7
Hoping this thread stays up wow I never thought of running the wires like you did since those points are a paint to bridge where the resistors are missing. nice work. good to see new ideas
No reason for it to come down unless it turns into a flame war. I'm home for the holidays, but when I get home, I'll take some pics of recent work.
 
Red

Red

Newbie
VIP
Retired
Scaling the Mountain Mythical Veteran MotM
Messages
15,366
Solutions
3
Reaction score
10,426
Points
2,300
Sin$
7
I hear alot of members complaining about installs on RGh and Jtags
so figured i would post a pic of mine and maybe members will show there work also
I have been doing this work now for almost 7 years now
started out with repairs and then jtags and rgh's
when they came out
there are alot of good sellers out there and I see alot of there work
so thought i would share mine
and hope some others share photo's of there
and hopefully people will be honest and rate others work also
post pictures of your installs and the boot times of the consoles
So members can see your work
Please leave feedback
Thank you!

Matrix Glitcher V3 Corona V3
Boot times instant to 30 seconds
100_6499.jpg


Does a partial install count? I started my first system last night and managed to get 4 successful nand reads without any bad blocks

Burnt points are from the QSB I tried to use that didnt work too well
JZlGTGZ.jpg
 
D

Deleted member 777936

Houston, we have a problem.
Messages
2,252
Reaction score
1,259
Points
505
Sin$
0
This is a good idea u got here



6ED0CCCB-5F72-4269-ACC1-699C25B20883_zpsxruzcybu.jpg


Don't have recent photos of my phat installs but if this thread is still up I'll edit it and upload phat install and vid of it

Wow man you use some shiny solder :tongue: or maybe it's just the camera flash.
 
Rodent Modz

Rodent Modz

Jtags/RGHs customized consoles
Seasoned Veteran 10th Anniversary Grizzled Veteran
Messages
1,143
Reaction score
456
Points
280
Sin$
0
No reason for it to come down unless it turns into a flame war. I'm home for the holidays, but when I get home, I'll take some pics of recent work.
No flaming just hoping this thread helps some others with there work. and good to see new ideas and installs thanks for the reply
 
NETO0214

NETO0214

Banned
Messages
903
Reaction score
185
Points
135
Sin$
0
Wow man you use some shiny solder :tongue: or maybe it's just the camera flash.

I had a lamp on it could be that lol, use regular Fry's solder

Hoping this thread stays up wow I never thought of running the wires like you did since those points are a pain to bridge where the resistors are missing. nice work. good to see new ideas

Yea thought of it one day I was doing a corona v3, the solder didn't wanna stick and my tip wasn't perfect as well so decided to try that and it work after that is the only way I do it now
 
Last edited:
Rodent Modz

Rodent Modz

Jtags/RGHs customized consoles
Seasoned Veteran 10th Anniversary Grizzled Veteran
Messages
1,143
Reaction score
456
Points
280
Sin$
0
I am glad to see some members starting to post there work this seems to help alot of members out. so many contact me on aim though with there proof hopefully i can get them to post here soon
 
HuskerHeaven

HuskerHeaven

when I took his glass of champagne...
Retired
Messages
8,249
Reaction score
3,370
Points
1,680
Sin$
7
I am glad to see some members starting to post there work this seems to help alot of members out. so many contact me on aim though with there proof hopefully i can get them to post here soon
The more I think about this though, people are only really gonna post their best work on one of their consoles. It may not be indicative of the average console they put out, nor the level of customer satisfaction that one provides. While it can help customers decision, it should only be a part of the decision, not the whole decision.
 
Castro Saint

Castro Saint

THE DRUGS DONT WORK
Messages
320
Reaction score
76
Points
85
Sin$
0
Does a partial install count? I started my first system last night and managed to get 4 successful nand reads without any bad blocks

Burnt points are from the QSB I tried to use that didnt work too well
JZlGTGZ.jpg


You need to strip less insulation off, way too much copper showing. And also try not to burn the insulation.

When it comes to soldering, less is better. Solder itself isn't a great conductor.

I work on electronic and electrical components for a living btw :smile:
 
Red

Red

Newbie
VIP
Retired
Scaling the Mountain Mythical Veteran MotM
Messages
15,366
Solutions
3
Reaction score
10,426
Points
2,300
Sin$
7
You need to strip less insulation off, way too much copper showing. And also try not to burn the insulation.

When it comes to soldering, less is better. Solder itself isn't a great conductor.

I work on electronic and electrical components for a living btw :smile:
The burns are from when I tried to use the horrible QSB but I will keep that in mind. Thank you!
 
Rodent Modz

Rodent Modz

Jtags/RGHs customized consoles
Seasoned Veteran 10th Anniversary Grizzled Veteran
Messages
1,143
Reaction score
456
Points
280
Sin$
0
I will admit this isn't my best work on 4gb qsb install but it does the job and you can see my bridge points on the resistors also for E and F
100_6518.jpg
 
NETO0214

NETO0214

Banned
Messages
903
Reaction score
185
Points
135
Sin$
0
I will admit this isn't my best work on 4gb qsb install but it does the job and you can see my bridge points on the resistors also for E and F
100_6518.jpg

Looks good to me lol, idk how u like the qsb man that's the #1 thing I hate the most
 
Rodent Modz

Rodent Modz

Jtags/RGHs customized consoles
Seasoned Veteran 10th Anniversary Grizzled Veteran
Messages
1,143
Reaction score
456
Points
280
Sin$
0
Looks good to me lol, idk how u like the qsb man that's the #1 thing I hate the most
I make the best of them i only use them for 4gb nands I will use them for the nand x points if i have them instock and makes the install look really clean
 
Top Bottom
Login
Register