What's new

Solved Serious Problem

  • Thread starter Magicbum
  • Start date
  • Views 329
Magicbum

magicbum18

Enthusiast
Messages
942
Reaction score
72
Points
95
Sin$
0
I got a xbox 360 from a friend and it worked perfectly. i tried to j-tag it and could never end up dumping the nand properly. so i just ordered a cygnos, and i unsoldered all the wires. now i hooked it up to see if it still worked, and it wont even turn on. could someone please help me! i have spent a good amount of money on all the supplies and i would hate to see it all go to waste.
 
KiD CuDi

KiD CuDi

Enthusiast
Messages
897
Reaction score
438
Points
125
Sin$
7
You may have done something to short it:frown:, my suggestion is go to radioshack and get a de-soldering gun should like like a big needle, what it does is heat up the solder just enough to melt it then sucks it up, see if that helps, also make sure there is still enough solder in the eyelits for where the connections were made:smile:
 
Magicbum

magicbum18

Enthusiast
Messages
942
Reaction score
72
Points
95
Sin$
0
there is two holes where the "eye lits" were, should i fill those back up with solder? i am hoping that is the problem. and it is a xenon motherboard.
 
Top Bottom
Login
Register