What's new

Solved semi modded trinity..too many bad blocks !!

  • Thread starter loady
  • Start date
  • Views 1,582
L

loady

Enthusiast
Messages
341
Reaction score
6
I got a 360 or two laying around that i had started to mod some years ago and left them, the one i am trying to finish is apparently a trinity jasper 16mb or so jrunner tells me, i have included picture of soldering and you can see the small square add on board that would denote a trinity, i have connected and jrunner to it and also tried with my nand-x, both will read the nand and they come back as identical but it says to many bad blocks, im not sure how far i got with it, when i was doing lots of them i would always save everything in a folder with the console serial number as title, i had soldered in the cool runner but at some point i disconnected it, the only cool runner wire that is still connected is the shielded cable that solders to the underside. Not sure how to proceed with this one as i am reading that to many bad blocks is not good for the nand.

https://www.dropbox.com/s/vf53gobbgerxiln/WIN_20170904_17_56_19_Pro.jpg?dl=0


===================================================
Monday, 04 September 2017 17:24:29

J-Runner v0.3 Beta (7) Started


It's advised to run in administrator mode on Windows 8
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Connection Error
Checking Files
Connection Error
Version: 10
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Jasper 16MB Manually Selected
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Cancelled
Version: 10
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Cancelled
Version: 10
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Cancelled
Version: 10
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\output\nanddump1.bin
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 3:44 min:confused:ec

Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
Trinity
Nand Initialization Finished
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 3:45 min:confused:ec

Comparing...
Too Many Bad Blocks
Too Many Bad Blocks
Nands are the same
Checking Console..
Version: 10
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Checking Console..
Version: 10
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
I got a 360 or two laying around that i had started to mod some years ago and left them, the one i am trying to finish is apparently a trinity jasper 16mb or so jrunner tells me, i have included picture of soldering and you can see the small square add on board that would denote a trinity, i have connected and jrunner to it and also tried with my nand-x, both will read the nand and they come back as identical but it says to many bad blocks, im not sure how far i got with it, when i was doing lots of them i would always save everything in a folder with the console serial number as title, i had soldered in the cool runner but at some point i disconnected it, the only cool runner wire that is still connected is the shielded cable that solders to the underside. Not sure how to proceed with this one as i am reading that to many bad blocks is not good for the nand.

https://www.dropbox.com/s/vf53gobbgerxiln/WIN_20170904_17_56_19_Pro.jpg?dl=0


===================================================
Monday, 04 September 2017 17:24:29

J-Runner v0.3 Beta (7) Started


It's advised to run in administrator mode on Windows 8
WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Connection Error
Checking Files
Connection Error
Version: 10
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Jasper 16MB Manually Selected
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Cancelled
Version: 10
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Cancelled
Version: 10
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Cancelled
Version: 10
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\output\nanddump1.bin
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 3:44 min:confused:ec

Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
Trinity
Nand Initialization Finished
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 3:45 min:confused:ec

Comparing...
Too Many Bad Blocks
Too Many Bad Blocks
Nands are the same
Checking Console..
Version: 10
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Checking Console..
Version: 10
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Seems To Be A Soldering Issue.
 
L

loady

Enthusiast
Messages
341
Reaction score
6
i have had a very close look with a loupe and there is not bridging or splashes, I can reflow them but I don't honestly think its the soldering
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
Just Retouch Them But Add Flux.
 
L

loady

Enthusiast
Messages
341
Reaction score
6
Just Retouch Them But Add Flux.

If it was the soldering, wouldn't it not connect at all, seems weird that it is reading the nand just finding bad blocks ??
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
If it was the soldering, wouldn't it not connect at all, seems weird that it is reading the nand just finding bad blocks ??
If It Wasn't A Soldering Issue It Would Of Read Nand Like Nothing.

Now Could Be 2 Things Soldering Which I Suspect It Is Cause Your Solder Looks Very Dry Like If You Didn't Use Flux Or Your Nand Reader Is Broken.

But By The Pictures You Posted Seems To Be Soldering.
 
L

loady

Enthusiast
Messages
341
Reaction score
6
If It Wasn't A Soldering Issue It Would Of Read Nand Like Nothing.

Now Could Be 2 Things Soldering Which I Suspect It Is Cause Your Solder Looks Very Dry Like If You Didn't Use Flux Or Your Nand Reader Is Broken.

But By The Pictures You Posted Seems To Be Soldering.
I do use flux, I'll reflow the points, perhaps solder some pins to the end of wires and sink them. The fact that at some point I had installed the cr, I would of had the nand dumped at this point, I can't find the nand as I don't have the mobo serial (other than what is on the chassis I believe the mobo was in.
 
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,670
Reaction score
1,085
I do use flux, I'll reflow the points, perhaps solder some pins to the end of wires and sink them. The fact that at some point I had installed the cr, I would of had the nand dumped at this point, I can't find the nand as I don't have the mobo serial (other than what is on the chassis I believe the mobo was in.
If you have a multi-meter, test for continuity between the points on the motherboard and the nand reader. Also, do you really have a nand-x? 3:44 seems a lot for a nand-x.
 
L

loady

Enthusiast
Messages
341
Reaction score
6
If you have a multi-meter, test for continuity between the points on the motherboard and the nand reader. Also, do you really have a nand-x? 3:44 seems a lot for a nand-x.

I have jrunner and nand-x, also I'm using a windows surface book running win ten, I can get the jrunner to work but nand-x keeps crashing jrunner. i have tested the J2C1 & J2C3 points to the jrunner from the backside of mobo to assure i am connecting with the points and not to the wire going in, i have good continuity.

Im sure it doesnt but ill ask anyway, does it matter that the mobo is in or out of the chasis when trying to read nand ?
 
Last edited:
L

loady

Enthusiast
Messages
341
Reaction score
6
after messing with drivers, i got nand-x up and running. Wouldi get read errors if there was already an image written to it ?


===================================================
Tuesday, 05 September 2017 17:51:30

J-Runner v0.3 Beta (7) Started


Connection Error
Checking Files
Connection Error
Checking Console..
Version: 03
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Version: 03
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Jasper 16MB Manually Selected
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\nanddump1.bin
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 2:25 min:confused:ec

Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
Trinity
Reading Nand
Nand Initialization Finished
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 2:22 min:confused:ec

Comparing...
Too Many Bad Blocks
Too Many Bad Blocks
Nands are the same
Load Files Initiliazation Finished
 
L

loady

Enthusiast
Messages
341
Reaction score
6
so if the soldering is ok, would my best bet be to rebuild the NAND using a doner NAND ?
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
so if the soldering is ok, would my best bet be to rebuild the NAND using a doner NAND ?
Post Pictures Of The Soldering You Redid.

I Wouldn't Write Anything That's To Many Bad Blocks.
 
L

loady

Enthusiast
Messages
341
Reaction score
6
I never got to reflowing yet, as I tested poi ts on reverse of mono to Brunner using a multimeter, i got continuity, does this not prove the soldering is good ?

I have discovered that I selected the jasper 16mb due to confusion that two consoles share the same flash config, my board is definatley a slim, if I dump nand again, this time selecting trinity, would I expect not to get so many bad blocks, given that I believe I had written ecc to this nand
 
L

loady

Enthusiast
Messages
341
Reaction score
6
Tried to make nand from doner but I keep getting failed errors 
Tried to make nand from doner but I keep getting failed errors 
Tried to make nand from doner but I keep getting failed errors
 
H

HuskerHeaven

when I took his glass of champagne...
Staff
Messages
8,251
Reaction score
3,380
The error reading is 100% soldering. Something is probably bridged slightly. Remove, and try and space the wires out a little bit, reflux, resolder, and clean it all up.
 
L

loady

Enthusiast
Messages
341
Reaction score
6
The error reading is 100% soldering. Something is probably bridged slightly. Remove, and try and space the wires out a little bit, reflux, resolder, and clean it all up.

OK, wires removed and cleaned up HERE and wires resoldered with plenty of flux HERE. still getting exact same error, exact same blocks, using jrunner and NAND-x.

Something noteworthy, i had performed a dump and didnt realise the yellow wire had freed itself, the dump was exactly the same as when it was when i reconnected it. That point that the yellow goes onto seems to absorb a lot of the heat from the iron, i ramped it up to 400 degrees, its like trying to solder to a ground point..anyway, jr log below.


===================================================
Thursday, 07 September 2017 19:52:51

J-Runner v0.3 Beta (7) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Connection Error
Checking Files
Connection Error
Version: 03
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Trinity Manually Selected
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Cancelled
Version: 03
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\nanddump1.bin
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F

===================================================
Thursday, 07 September 2017 19:56:46

J-Runner v0.3 Beta (7) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Connection Error
Checking Files
Connection Error
Version: 03
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Trinity Manually Selected
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\nanddump1.bin
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 2:27 min:confused:ec

Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
Reading Nand
Trinity
Nand Initialization Finished
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 2:28 min:confused:ec

Comparing...
Too Many Bad Blocks
Too Many Bad Blocks
Nands are the same


Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\nanddump1.bin
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 3:48 min:confused:ec

Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
Trinity
Nand Initialization Finished
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 3:52 min:confused:ec

Comparing...
Too Many Bad Blocks
Too Many Bad Blocks
Nands are the same
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
OK, wires removed and cleaned up HERE and wires resoldered with plenty of flux HERE. still getting exact same error, exact same blocks, using jrunner and NAND-x.

Something noteworthy, i had performed a dump and didnt realise the yellow wire had freed itself, the dump was exactly the same as when it was when i reconnected it. That point that the yellow goes onto seems to absorb a lot of the heat from the iron, i ramped it up to 400 degrees, its like trying to solder to a ground point..anyway, jr log below.


===================================================
Thursday, 07 September 2017 19:52:51

J-Runner v0.3 Beta (7) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Connection Error
Checking Files
Connection Error
Version: 03
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Trinity Manually Selected
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3 (5) Core Pack\output\nanddump1.bin
Cancelled
Version: 03
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\nanddump1.bin
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F

===================================================
Thursday, 07 September 2017 19:56:46

J-Runner v0.3 Beta (7) Started


WARNING! - Your selected working directory already contains files!
You can view these files by using 'Show Working Folder' Button

Connection Error
Checking Files
Connection Error
Version: 03
Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Trinity Manually Selected
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\nanddump1.bin
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 2:27 min:confused:ec

Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
Reading Nand
Trinity
Nand Initialization Finished
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 2:28 min:confused:ec

Comparing...
Too Many Bad Blocks
Too Many Bad Blocks
Nands are the same


Flash Config: 0x00023010
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
00023010
Trinity, Jasper 16MB
CB Version: 0
Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\nanddump1.bin
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 3:48 min:confused:ec

Reading Nand to C:\Users\Kevin\Documents\xbox\J-Runner v3\output\nanddump2.bin
Initializing nanddump1.bin..
Too Many Bad Blocks
Trinity
Nand Initialization Finished
Reading Nand
Error: 258 reading block 1
Error: 258 reading block 2
Error: 258 reading block 3
Error: 258 reading block 4
Error: 250 reading block 5
Error: 258 reading block 30
Error: 258 reading block 31
Error: 258 reading block 32
Error: 258 reading block 33
Error: 258 reading block 34
Error: 258 reading block 35
Error: 258 reading block 36
Error: 258 reading block 37
Error: 258 reading block 38
Error: 258 reading block 39
Error: 258 reading block 3A
Error: 258 reading block 3B
Error: 258 reading block 3C
Error: 258 reading block 3D
Error: 250 reading block 3E
Error: 250 reading block 3F
Error: 258 reading block 40
Error: 258 reading block 41
Error: 258 reading block 42
Error: 258 reading block 43
Error: 258 reading block 44
Error: 258 reading block 45
Error: 258 reading block 46
Error: 258 reading block 47
Error: 258 reading block 48
Error: 258 reading block 49
Error: 258 reading block 4A
Error: 258 reading block 4B
Error: 258 reading block 4C
Error: 258 reading block 4D
Error: 250 reading block 4E
Error: 250 reading block 4F
Done!
in 3:52 min:confused:ec

Comparing...
Too Many Bad Blocks
Too Many Bad Blocks
Nands are the same
Remove Stby_Clk Wire Off The Motherboard And Clean Off That Point And Try Again.
 
L

loady

Enthusiast
Messages
341
Reaction score
6
Remove Stby_Clk Wire Off The Motherboard And Clean Off That Point And Try Again.

OK, ill have to do that tomorrow, i had also left the CPU_RST wire attached on back of mobo and the ground, should i remove these too?
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
OK, ill have to do that tomorrow, i had also left the CPU_RST wire attached on back of mobo and the ground, should i remove these too?
Just The Stby_Clk.
 
Top Bottom