Solved RROD ~ 0002

[tim008]

I have an xbox (possilbly exploitable) And it has 3RROD with secondary error code 0002, and the GPU is pretty much cold.[/b]


Any advice is much appreciated

 

[tim008]

Bump.

 

[snowwhite]

Reflow it and enjoy

 

[tim008]

Ive re-flowed the GPU and CPU with flux, and x-clamped and applied a slither of arctic silver. Just like i have done on the other 6. And they are fired first time, this 1 is stubborn <_<

 

[Brother Jordan]

Ive re-flowed the GPU and CPU with flux, and x-clamped and applied a slither of arctic silver. Just like i have done on the other 6. And they are fired first time, this 1 is stubborn <_<

if you have only done the GPU/CPU, go ahead and reflow the whole board. southbridge, ram, etc... ur board has a cold joint somewhere

 

[tim008]

if you have only done the GPU/CPU, go ahead and reflow the whole board. southbridge, ram, etc... ur board has a cold joint somewhere

Nice
Top and bottom, and flux?

 

[II injections]

Yeah reflow it , then turn the badboy on

 

[Brother Jordan]

Nice
Top and bottom, and flux?

no need for flux. warm the whole mobo on the bottom, but not hot enough for solder to melt, flip it over, then melt the solder. do not apply direct heat to the capacitors. i recommend covering all plastic parts and capacitors with a lot of aluminum foil

 

[PinkF Zeppelin]

I suggest an oven reflow.