What's new

Tools RGLoader 0v295 [Speed increase + RGLoader runtime patcher]

  • Thread starter M0j0j0-j0
  • Start date
  • Views 31,651
M0j0j0-j0

M0j0j0-j0

Enthusiast
Messages
464
Reaction score
77
Points
85
Sin$
0
___/ - RESET GLITCH LOADER-dev 0v295 - \___
________ #RGLoader @ EFnet ________

***THIS IS A BETA RELEASE, NOT EVEN THE NFO IS FINISHED YET***

332oymo.png

We had to issue another release to fix a dumb mistake with falcon rgh1, so we thought it would be a good idea to throw some new features in to
make it worth updating
icon_e_smile.gif
.

There has been another dynamic patch added that gives a pretty great boot speed increase (4-5 seconds faster). On a falcon jtag it measured 8 seconds
to bootanim in minimal mode, and 9.5 seconds in full mode.

We have added a library (RGLoader.xex) that runs after the kernel has been initialized and patches xam and other things. We will be adding more
features to this later, but copy the RGLoader.ini to the root of your hard drive to check out some new features.
  • USB Fat32 drives show up in xbox neighborhood and you can launch games/xex from them.
    (this means you can flash the image on, boot into minimal, and load the hdd files off a flash drive and copy them to the hard drive)
  • Xbox Live DNS blocking
  • Configurable default dashboard
MAKE SURE YOU UPDATE YOUR HDD FILESYSTEM FOLDER!

----------------------------
WARNING: There is a problem with some slims not running in minimal mode (NAND only mode). This means it is critical for you to
have a hdd and your files setup correctly. You will get E79 if you have this problem.
----------------------------

Compatibility:
Motherboard
-Xenon Jtag
-Zephyr Jtag/RGH1/RGH2
-Falcon Jtag/RGH1/RGH2
-Jasper Jtag/RGH1/RGH2
-Trinity RGH (minimal mode may not work)
NAND
-16MB
-64MB


===================Flexible Systemroot Patches=========================
(hard drive free installs!)

We have added a new feature to replace the E90 error that gets thrown when the hard drive is missing or files have been misnamed.
If any errors occur during its attempt to remap systemroot to the hard drive (wrong folder name, hdd unplugged, etc..) it will boot into
minimal NAND only mode where the devkit launcher dashboard will still boot.

This means that a hard drive is not neccesary to run RGLoader! This also means that you can just flash the image on and use minimal mode to copy
and setup the hard drive files for the full installation using xbox neighborhood.

It is not recommended to use the minimal mode, but it does work.
================================================================


=============JTAG BETA RELEASE - All but big block jasper ====================
We are now beta testing xenon and hdmi jtags!

When building a jtag image, it is best to supply an already jtagged NAND. This way any customizations
to your SMC will be kept and also if your crc does not match it will not matter. (this will not be neccesary in final release)
NOTE: When an already patched SMC is supplied, the builder will say (unable to patch). Just ignore this.

XELL HAS BEEN ADDED TO JTAG IMAGES!
icon_e_smile.gif

===============================================================

=====================DUMMY KV Generation===========================
To protect you from getting your keyvaults banned, we have added an option to options.ini for creating a
temporary dummy KV. This sometimes introduces a lag when going to the dashboard and some xex caused by the
xbox live connection timeout. If this annoys you, just disable it in options.ini and we will get it fixed soon.
================================================================


RGH2 Support has been added! Big thanks to Team-Xecuter for their research and work.

Dynamic patches have been added! Use options.ini to configure extra patches like NOFCRT or NOMU.

Big thanks to team-xecuter & xconsoles for donating a xenon jtag! Would not have been possible without this.

This builder still does not support big block jaspers. I know this sucks for a lot of jtags, so we will try to get this out ASAP.


---Things to come---
Jtag patch compiling at build time
Big block support.
hvxbootOS
much more...

\_____________|- RGLoader Runtime Patcher -|________________/

Features
-----------------
Adds extra patches for xam or any other exe/dll in memory. Gives more runtime access and control on patches. Loads rgloader.ini from the
hard drive root and also flash drive root.

Block_Live_Dns = Blocks xbox live DNS so you can't "phone home"
Map_USB_Mass = Makes all usb devices show up in xbox neighborhood
Default_Dashboard = Sets the default dashboard

Usage
-----------------
Configure and place rgloader.ini onto the root of your hard drive (Partition 1), or usb thumb drive.
Reboot.


\_____________________|- Usage -|________________________/

AS OF 0v99 YOU NEED TO PROVIDE THE FILESYSTEM FILES --

Download a filesystem package and extract it into the same folder as this builder (merging filesystems and loaders)

Slims require fcrt.bin to play retail DVDs.
-----------------------------------------------------

You will need .NET Framework 4 installed. May work with Mono.

Create a folder 'Filesystems' (don't forget the 's') on the xbox hard drive.
(This is where you will store the devkit system files since they won't all fit on a 16MB retail NAND.)

Copy the devkit files to a folder '14699-dev' (or 14719-dev for ver.14719) inside of 'Filesystems' on the HDD.
ie: hdd:/Filesystems/14699-dev

Put your nand next to the builder and name it "nand.bin".

Open the RGBuild Launcher and type in your CPU_Key and select your build options.

Click "RGBuilder" button to start the process.

Output will be next to this file named: Image._____.bin


----------- Prototype NAND Image Editor -----------
Click "Image Editor" button in the launcher, or run rgbuild.exe /ui to open the rgbuild UI, which is a prototype NAND image editor similar to 360 flash tool. The GUI is still in beta, but should be very functional. Please reports bugs to #rgloader!


\_____________________|- Known Bugs -|________________________/

-Occasionally slims/trinitys will freeze or reboot on the first boot attempt after a reflash.
This usually only happens the first time, if ever.

-Some slims won't boot into minimal mode.

-Slims require fcrt for retail dvds to run.


\_____________________|- Changelog -|_________________________/

0v295
-Fixed falcon rgh1 issue in 0v290
-Added kernel side patch loader
-Added INI: hdd1:\RGLoader.ini
-Block live dns option
-Add USB drives to xbox neighborhood (thanks Natelx!)
-Assign default dashboard
-Fixed dummy KV induced sign on lag
-MUCH Faster boot speeds (by 4-5 seconds! 9.5 second jtag load)

0v290
-Fixed RGH2
-Added flexible systemroot patches! (no hdd needed!)
-Added xell to jtag images
-Fixed ini problems
-Slightly faster phat boot times

0v280
-Fixed slim CBB pairing data issue
-Added dynamic patches, check out options.ini [Patches]
-Prettied up patch code (thanks for macros.S cOz!)
-New GUI Update via m0j0j0_j0
-Systemroot patches are now optional (dynamic)
-Added custom error code e90! (hdd filesystem failure)
-Fixed HDMI jtags
-Added RGH2 support! (thanks Team Xecuter)

0v260
-Added better error handling on patch compiling
-MUCH faster compile times
-Added GUI launcher
icon_e_biggrin.gif
(thanks m0j0j0_j0!)
-GUI Launcher settings save to options.ini
-Xenon jtag 14719 fixed

0v255
-Fixed 14719 dash issue
-Fixed 14719 retail xex issue
-Fixed KV editing in GUI
-Added dummy KV generating (thanks cOz!)
-Added option to generate KV in options.ini
-Patched xbdm to always be dev, instead of xbdm.ini (thanks Natelx!)

0v240
-Integrated bat files into rgbuild.exe
-Fixed jasper issue
-Added options.ini
-Lots of changes to builder, mostly internal
-Missing filesystem files will now be ignored (dae, fcrt, etc..)
-Changed selection menu
-Auto detects console using smc (thanks cOz!)
-Fixed CF/CG bug (can now use them in GUI)
-Support for JTAG images
icon_e_biggrin.gif

-Changed selection menu layout
-Builder now ignores missing filesystem files instead of locking up
-Added 14719
-Support for trinity 14719 source images
-Updated xell binary to v0.991
-Added icons to builder (thanks m0j0j0_j0!)
-Fixed xell binary size issue
-Added option for compiling phat CD to options.ini
-Fixed issue with KV editing not saving

0v170
-Added KV editing to the GUI
-Xell dual boot (xell-gggggg.bin)
-Bad block support
-Added font files to nand image to fix fsd (thanks cOz)
-No need to run image through nandpro anymore
-More error handling, builder doesn't say successful build every time

0v100
-Added 14699 patches
-Moved files location on hdd
-Slims show up as dev kit on 14699 without xbdm.ini or modded xbdm.xex
-Retail disc support on slims
-Added neededfiles.txt to the folders


\_____________________|- GREETINGS -|_________________________/

RGLoader was started from the foundations left by others.
We hold no claim to researching everything used in rgloader.
It's thanks to the work of the amazing people below that we got anywhere:

tmbinc, almost every 360 tool owes you for your initial work. although
we may be -FAR- away from your intended goals, we'd still like to thank
you for your amazing work and the example you set for a good reverse engineerer.

The 360 Flash Tool team, thanks for your amazing tool which has
helped many people, many times over. My only gripe is that it's
not open, maybe one day.

GliGli, Tiros, and co., I'm sure anybody with a glitched console should
know the work you all put in. I hope recent releases won't deter you
from continuing to contribute to the scene with your work.

Last but not least: the donators who helped get me a glitched box
and CPLD, I will add the names to the nfo in the final release.

jsjar for graphics and dash skin.

m0j0j0_j0 for RGLauncher skin and icons.

Big thanks to cOz for tips and hints and for the work he has contributed
to the scene.

Thanks to Tortuga Cove for providing news updates and hosting services.

GliGli, Tiros, cOz, and co.
IceKiller
Team-Xecuter
TeamFSD
Freeboot/ggbuild/xebuild team
Natelx

----------------------------------------------------
#RGLoader-dev Group

tydye81
stoker25

Deathlok
RF1911
spandaman
Juggahax0r
Evil0ne
XDK
Mustache
iCEQB
m0j0j0_j0

----------------------------------------------------
Testers/Helpers/#RGLoader regulars

Ameel
Grim187
Rumblpak
iLLNESS
Xumpy
ddxcb
Gadorach
no1b4me
Mycah
Alter
_nitram
PizzaG


(many more to add)



RGBuild Beta 0v295: http://www.mediafire.com/?seis8ortk880yqx
14719 Filesystem Package 0v295: http://www.mediafire.com/?z7skjnd1k68uvzx


IF YOU DO NOT HAVE YOUR OS AS ENGLISH PLEASE CHECK THIS FIX:
Multi-Language GUI Fix:
http://www.qfpost.com/file/d?g=qhZNVj1SL
Instructions:
We've discovered that the Launcher GUI had issues with finding the .dll libraries so I threw together this fix. Copy the content and paste it into the rgloader folder, make sure you overwrite all the old files!

If you have any more issues please post them here:
http://rgloader.spiffy360.com/index.php
 
M0j0j0-j0

M0j0j0-j0

Enthusiast
Messages
464
Reaction score
77
Points
85
Sin$
0
Non-English GUI Crash Fix! If you had issues with the GUI crashing please look at the following fix.

IF YOU DO NOT HAVE YOUR OS AS ENGLISH PLEASE CHECK THIS FIX:
Multi-Language GUI Fix:
http://www.qfpost.com/file/d?g=qhZNVj1SL
Instructions:
We've discovered that the Launcher GUI had issues with finding the .dll libraries so I threw together this fix. Copy the content and paste it into the rgloader folder, make sure you overwrite all the old files!

If you have any more issues please post them here:
http://rgloader.spiffy360.com/index.php
 
Thunder Waffle

Thunder Waffle

Enthusiast
Programmer
Messages
117
Reaction score
65
Points
125
Sin$
7
I just flashed this to my JTAG Zypher CB 4580, and got some strange results. I can't boot Xell or the normal dash anymore and I am getting a secondary error of 0022. Sounds like a bad flash to me. I still don't understand why Xell won't boot though.
 
M0j0j0-j0

M0j0j0-j0

Enthusiast
Messages
464
Reaction score
77
Points
85
Sin$
0
I just flashed this to my JTAG Zypher CB 4580, and got some strange results. I can't boot Xell or the normal dash anymore and I am getting a secondary error of 0022. Sounds like a bad flash to me. I still don't understand why Xell won't boot though.
Try hard flashing.
 
Call me LEWY

Call me LEWY

Maybe?
Forum Addict Grammar Nazi Mr. Nice Guy
Messages
3,961
Reaction score
597
Points
515
Sin$
7
this doesnt really speed anything up, i disabled the dummy KV and the signin speed is perfect, although loading the dashboard is the same speed as before.
 
Chosen One

Chosen One

I work like Anders Holmvich
Messages
1,542
Reaction score
534
Points
190
Sin$
7
M0j0j0-j0 M0j0j0-j0

Apparently I can't run modified xexs with rgloader? I used the same xexs (with rsa checks removed as well as the mw2 default_mp.xex patched with craigs alteriw) before, and they worked fine, but after i updated my jtag to 14719 and used rgloader, when I run them I just get a black screen and my console freezes. I am using a jasper jtag 16mb if that helps...
 
M0j0j0-j0

M0j0j0-j0

Enthusiast
Messages
464
Reaction score
77
Points
85
Sin$
0
M0j0j0-j0 M0j0j0-j0

Apparently I can't run modified xexs with rgloader? I used the same xexs (with rsa checks removed as well as the mw2 default_mp.xex patched with craigs alteriw) before, and they worked fine, but after i updated my jtag to 14719 and used rgloader, when I run them I just get a black screen and my console freezes. I am using a jasper jtag 16mb if that helps...
Are you running watson to see why it's crashing?

Also the altered DLLs could be signed for retail, make sure they've been resigned for devs and also make sure to check them with xextool
 
Chosen One

Chosen One

I work like Anders Holmvich
Messages
1,542
Reaction score
534
Points
190
Sin$
7
Are you running watson to see why it's crashing?

Also the altered DLLs could be signed for retail, make sure they've been resigned for devs and also make sure to check them with xextool
I've never heard of watson. I'll look into it.

I'm pretty sure it has nothing to do with the dll because my cod4 default_mp.xex doesnt launch either and all that has is the rsa checks removed...
 
Top Bottom
Login
Register