What's new

Solved Rgh zephyr 1.2 cool runner

  • Thread starter Nikolai117
  • Start date
  • Views 3,374
N

Nikolai117

Newbie
Messages
20
Reaction score
1
How difficult will it be to rgh this model its the only one i have.
 
N

Noobert

RGH/Flashing Support
VIP
Retired
Messages
8,385
Reaction score
4,629
How difficult will it be to rgh this model its the only one i have.
Zephyrs are a real pain in the ***.

You may get it to work no problem, you might have a 2 minute boot time, you might not get it to boot at all.
It's a real hit or miss.

In terms of difficulty, it's the same as every other RGH 1.2 install.
 
N

Nikolai117

Newbie
Messages
20
Reaction score
1
If i get it to boot the first time will it boot normally after or still hit and miss
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
If i get it to boot the first time will it boot normally after or still hit and miss
Out of 100th Post I’ve Seen About RGH 1.2 Zephyr It’s Never Successful.

Get Yourself A X360ace V3 And Do RGH2 With 15432 Files.
 
N

Nikolai117

Newbie
Messages
20
Reaction score
1
Can i get any x360 ace v3 chip or does it need to be one for the zepyhr
 
N

Nikolai117

Newbie
Messages
20
Reaction score
1
Can I get a guide for the ace v3 on a zepyhr
 
N

Nikolai117

Newbie
Messages
20
Reaction score
1
So with the ace do I still need to solder the jr prgramer to the Xbox motherboard
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
So with the ace do I still need to solder the jr prgramer to the Xbox motherboard
J-R Programmer Is For Reading The Nand And Programing The Glitch Chips So It’s A Necessary Step.
 
N

Nikolai117

Newbie
Messages
20
Reaction score
1
so i solder the jr p to the xbox for the nand step then to program the ace i solder it to the ace 
also i cant find the zephyr timing files any idea where i can get those
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
so i solder the jr p to the xbox for the nand step then to program the ace i solder it to the ace 
also i cant find the zephyr timing files any idea where i can get those
1. Solder J-R Programmer To Xbox 360
2. Open Jrunner On Pc
3. Click Read Nand
4. Make Sure Glitch2 Is Selected
5. Create Ecc
6. Write Ecc
7. Solder Glitch Chip
8. Program Glitch Chip
9. Boot Xell
10. Enter Cpu Key On Jrunner
11. Make Sure Glitch2 Is Selected
12. Create Xebuild
13. Write Nand

I Got The File I Can Send It When I Get Back Home.
 
N

Nikolai117

Newbie
Messages
20
Reaction score
1
That would be great i don't have the ace yet but i want to make sure i have everything before i start the project because i dont want to stop and surf the web for files and instructions.
 
N

Nikolai117

Newbie
Messages
20
Reaction score
1
how likely will the zephyr rgh with the ace chip
 
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
Have Better Chance Using X360ace V3 Then A Coolrunner So Basically 50/50
 
Top Bottom