What's new

Solved RGH Will Not Boot Fully.

T

tekcoR

Enthusiast
Messages
87
Reaction score
22
Hello, I have a falcon rgh and i when i try to boot it up it wont show up on my tv so it doesnt load fully. I think there is a problem with my hdmi port. I have used multiple hdmi cords and different tvs and it still wont boot fully.

Any ideas on a fix? Thanks
 
5

505_

"Milkshake?"
Messages
317
Reaction score
327
Hello, I have a falcon rgh and i when i try to boot it up it wont show up on my tv so it doesnt load fully. I think there is a problem with my hdmi port. I have used multiple hdmi cords and different tvs and it still wont boot fully.

Any ideas on a fix? Thanks
Are you using JRunner? Or anything that might cause issues?
It also might be a good idea to post more information. Like is it starting up to the point where the intro plays?
 
M

MattsNotBanned_

Enthusiast
Messages
136
Reaction score
11
Try using an AV cable if you've got that. If that doesn't help then I guess check your soldering on the glitch chip?

Did you buy this RGH or did you RGH it yourself?
 
S

SKITZELLES

Newbie
Messages
5
Reaction score
0
I believe if it's RGH its gonna be the soldering if not a bad motherboard when getting some of the points
 
T

tekcoR

Enthusiast
Messages
87
Reaction score
22
Are you using JRunner? Or anything that might cause issues?
It also might be a good idea to post more information. Like is it starting up to the point where the intro plays?
It doesnt show anything on the screen at all my tv says no signal. Thats why i think something is wrong with the HDMI port.
 
Try using an AV cable if you've got that. If that doesn't help then I guess check your soldering on the glitch chip?

Did you buy this RGH or did you RGH it yourself?
the soldering should be fine this is the first time its happened and i bought it two years ago
 
F

Fogel

Call Me Mclovin!
Messages
2,483
Reaction score
777
I would try AV cables before jumping to anything crazy. If that doesn't work well your gonna have to check the solder points.
 
A

afterjo

Enthusiast
Messages
775
Reaction score
115
Reset the console display settings
If the display problem is still not resolved, reset the display settings of your console. Here's how:

  1. Remove any discs from the disc tray.
  2. Turn off the console.
  3. Turn on the console.
    Note If you are using an Xbox 360 Wireless Controller, turn on the console by using the Guide button on the controller. Make sure that you use the player 1 controller when you do this. The player 1 controller will have the upper-left light illuminated.

  4. As the console starts, on the controller, press and hold Y while pulling the right trigger. The display settings are reset to the default settings, and then the console automatically restarts.
https://support.xbox.com/en-US/xbox-360/console/image-on-your-tv-is-unclear#44a7cc9e1a5d44dfb99627109e1ee57f

BTW, do your console even do green ring boot animation? Or ring indicator show connected controller?
 
Last edited:
T

tekcoR

Enthusiast
Messages
87
Reaction score
22
Reset the console display settings
If the display problem is still not resolved, reset the display settings of your console. Here's how:

  1. Remove any discs from the disc tray.
  2. Turn off the console.
  3. Turn on the console.
    Note If you are using an Xbox 360 Wireless Controller, turn on the console by using the Guide button on the controller. Make sure that you use the player 1 controller when you do this. The player 1 controller will have the upper-left light illuminated.

  4. As the console starts, on the controller, press and hold Y while pulling the right trigger. The display settings are reset to the default settings, and then the console automatically restarts.
https://support.xbox.com/en-US/xbox-360/console/image-on-your-tv-is-unclear#44a7cc9e1a5d44dfb99627109e1ee57f

BTW, do your console even do green ring boot animation? Or ring indicator show connected controller?
no it does not show the green ring boot animation. it usually doesnt if the hdmi doesnt work
 
I would try AV cables before jumping to anything crazy. If that doesn't work well your gonna have to check the solder points.
ok ill try that
 
T

tekcoR

Enthusiast
Messages
87
Reaction score
22
I would try AV cables before jumping to anything crazy. If that doesn't work well your gonna have to check the solder points.
damn nevermind i have av cables but not ones that have the piece that plugs into the back of my xbox (falcon)
 
T

tekcoR

Enthusiast
Messages
87
Reaction score
22
Reset the console display settings
If the display problem is still not resolved, reset the display settings of your console. Here's how:

  1. Remove any discs from the disc tray.
  2. Turn off the console.
  3. Turn on the console.
    Note If you are using an Xbox 360 Wireless Controller, turn on the console by using the Guide button on the controller. Make sure that you use the player 1 controller when you do this. The player 1 controller will have the upper-left light illuminated.

  4. As the console starts, on the controller, press and hold Y while pulling the right trigger. The display settings are reset to the default settings, and then the console automatically restarts.
https://support.xbox.com/en-US/xbox-360/console/image-on-your-tv-is-unclear#44a7cc9e1a5d44dfb99627109e1ee57f

BTW, do your console even do green ring boot animation? Or ring indicator show connected controller?
I tried doing the controller thing but i cant because it doesnt even connect to the console it just blinks trying to connect
 
J

JoinTheResistance

Dead to the world, alive for the journey...
Messages
4,670
Reaction score
1,088
Did you try booting Xell by powering the console on with the eject button?
 
A

afterjo

Enthusiast
Messages
775
Reaction score
115
yes and nothing shows up on my screen. i definitely think the hdmi port is ****ed

Try without any cables, it should give you full red ring (NO AV cable error).

Correction, it doesn't give red light. I have just tested with my falcon rgh 1.2. It simply turns off after some time.
 
Last edited:
T

tekcoR

Enthusiast
Messages
87
Reaction score
22
Try without any cables, it should give you full red ring (NO AV cable error).

Correction, it doesn't give red light. I have just tested with my falcon rgh 1.2. It simply turns off after some time.
Oh ok. I might buy some AV cables later with the correct port and if it works ill post on the thread. Thanks everyone
 
T

tekcoR

Enthusiast
Messages
87
Reaction score
22
Update: Even with AV cables it wont boot. Like the three rings do not show up on the LEDs, tv says no signal. Xell wont even show.
 
Top Bottom