What's new

Solved Rgh turns on then off then power brick turns red

  • Thread starter supermariotyt
  • Start date
  • Views 725

Broken Forever?

  • Yes

    Votes: 0 0.0%
  • Nah, You can fix it

    Votes: 2 100.0%

  • Total voters
    2
S

supermariotyt

Enthusiast
Messages
34
Reaction score
0
I have an rgh corona that I recently bought. It was working perfectly until a few days later, then it started having problems. I decided to walk off and wait a couple hours. It started working again. Then, a couple days later, it had this problem again. (Hint: The xbox turns on then shuts off instantly then the power brick turns red.) It wont work after a week still. Its a corona rgh halo 4 blue leds and rol. Please help me. I would be fine if I needed to take apart the xbox or buy anything, just tell me what and also my budget is about 11 dollars. Thank you in advance

Supermariotyt- A modder and hacker
 
B

BlueSn00w

RGH/JTAG Seller
Messages
257
Reaction score
38
I have an rgh corona that I recently bought. It was working perfectly until a few days later, then it started having problems. I decided to walk off and wait a couple hours. It started working again. Then, a couple days later, it had this problem again. (Hint: The xbox turns on then shuts off instantly then the power brick turns red.) It wont work after a week still. Its a corona rgh halo 4 blue leds and rol. Please help me. I would be fine if I needed to take apart the xbox or buy anything, just tell me what and also my budget is about 11 dollars. Thank you in advance

Supermariotyt- A modder and hacker
Open the console and take pics. Red light means ether the PSU is dead or there is a short in the console. So try another psu or open it and take HD Pics
 
S

supermariotyt

Enthusiast
Messages
34
Reaction score
0
I have tried to open the console, but the top plate is glued/bolted into the xbox, making it so I can only take a small look in the xbox. Will get on my phone and post pics of it
 
S

supermariotyt

Enthusiast
Messages
34
Reaction score
0

 
IF you cant see it its here
 
B

BlueSn00w

RGH/JTAG Seller
Messages
257
Reaction score
38
You need to unscrew it.
 
S

supermariotyt

Enthusiast
Messages
34
Reaction score
0
The screws are wayyy too tight
 
S

supermariotyt

Enthusiast
Messages
34
Reaction score
0
The screws are too tight, I only got to unscrew one.
 
S

supermariotyt

Enthusiast
Messages
34
Reaction score
0
Im saying it literally wont unscrew. I put every bit of my power and effort into it and it still wont.
 
S

supermariotyt

Enthusiast
Messages
34
Reaction score
0
K ill try
 
Still wont budge.
 
S

supermariotyt

Enthusiast
Messages
34
Reaction score
0
I got it opened, It wasn't opening because there was something on the screws. Here are some photoshttps://imgur.com/a/CofFi they are kinda blurry because my phone camera isn't that good.
 
B

BlueSn00w

RGH/JTAG Seller
Messages
257
Reaction score
38
bud i cant see anything. Your best choice is to send it to someone who knows what they are doing. (Me or someone else)
 
N

Newsk

Contributor
Messages
2,500
Reaction score
329
With it shorting out like that the first thing i would suspect are those led strips .I would look closely at them and the wires powering them .
 
B

BlueSn00w

RGH/JTAG Seller
Messages
257
Reaction score
38
With it shorting out like that the first thing i would suspect are those led strips .I would look closely at them and the wires powering them .
Good catch! Did not see that. Can you solder? I had the same issue. Someone sent me a borked console and it was just the LEDs shorting 12v.
 
S

supermariotyt

Enthusiast
Messages
34
Reaction score
0
Ohhh Thats Most likely the problem. Yes I can solder. The fan leds on the console are kind of ripped off B BlueSn00w And N Newsk
 
N

Newsk

Contributor
Messages
2,500
Reaction score
329
I would just remove or atleast depower them for test purposes. If the problem goes away then you know .
 
S

supermariotyt

Enthusiast
Messages
34
Reaction score
0
N Newsk It's gonna be hard but I may be able to do it. The guy hot glued them down.
 
Top Bottom