What's new

Solved RGH Jasper now error 0010

  • Thread starter Syco54645
  • Start date
  • Views 784
S

Syco54645

Newbie
Messages
34
Reaction score
1
Edit: So I moved the ground to the shielding on the vga and it boots to retail just find. Why is this? Just curious so that I know.

I have a 512 MB jasper and have somehow caused a 0010 error. My soldering all looks sound to me. Anyone see anything wrong or have an idea what could be up?
The console just powers on, no fan, and instantly RROD. I flashed back the retail NAND and disabled the CR and same thing. I also switched out the coolrunner to see if it was just a bad chip. Next step is to desolder but before I do that figured I would see if anyone sees anything off.

The console worked fine before this attempt. I also am going to redo the thermal paste to see if perhaps that is causing the issue. From what I read it might but but more than likely related to the orange wire or something with the south bridge.

https://photos.app.goo.gl/LQ1yocQtTXlhfoYq2

Thanks in advance.
 
Last edited:
K

Killjoy666

Getting There
Messages
1,649
Reaction score
234
Unsolder The Orange Wire From Motherboard And Try Again.
 
T

Turtle wave

Truth ent. Rgh support
Messages
1,008
Reaction score
232
The paste is an extremely uncommon problem people like to say that's issue to encourage purchase of another console.
Edit: So I moved the ground to the shielding on the vga and it boots to retail just find. Why is this? Just curious so that I know.

I have a 512 MB jasper and have somehow caused a 0010 error. My soldering all looks sound to me. Anyone see anything wrong or have an idea what could be up?
The console just powers on, no fan, and instantly RROD. I flashed back the retail NAND and disabled the CR and same thing. I also switched out the coolrunner to see if it was just a bad chip. Next step is to desolder but before I do that figured I would see if anyone sees anything off.

The console worked fine before this attempt. I also am going to redo the thermal paste to see if perhaps that is causing the issue. From what I read it might but but more than likely related to the orange wire or something with the south bridge.

https://photos.app.goo.gl/LQ1yocQtTXlhfoYq2

Thanks in advance.
 
Top Bottom