What's new

Solved Rgh help!!

  • Thread starter GetRequised
  • Start date
  • Views 131
G

GetRequised

Newbie
Messages
4
Reaction score
0
Ok I ****ed up. I accidentally put to much solder on contact point r3b15 to rgh it and removed the lower half of the resistors. Now can I just solder them closed.
 
H

Hypotoad

Enthusiast
Messages
496
Reaction score
107
It's a 33 ohm resistor and there for a reason, you need to replace it. If you can't, send it to someone who can, before more things go wrong.
 
G

GetRequised

Newbie
Messages
4
Reaction score
0
Can I use any 33 ohm resistor
 
H

Hypotoad

Enthusiast
Messages
496
Reaction score
107
Can I use any 33 ohm resistor

Yes but a surface mount one would be best, but a through hole 1/8watt (A 1/4 watt would work too but the 1/8 watt is smaller with thinner leads) would work as well, can you post pics of the area, as if it's all burned up its not an easy fix. I am not judging you these things happen, but seeing it's harder to fix the problem than cause it, sometimes you need to seek expert help.
 
Top Bottom