Solved Rgh Corona v2

[DhgDevilChild]

Si i got a corona v2 and a ace v3. I read the nand. Got the chip installed and flashed a timing file to it. (I tried to rgh a trinty so i didnt have the orignal timing file). I went through all of the timing files and nothing is working!

The ace v3 blinks once and never does it again on boot attempt

 

[Newsk]

I know u said u beleieve it's a v2 but I suggest removing the sync and verifying post traces are present and report back .

 

[DhgDevilChild]

There are post out traces! i got it to boot. i checked the wires on the back and i had 1 wire laying down on the board so it was touching 2 points! i got it to insta boot