XeDevn
Enthusiast
Ok so I have experience somewhat in doing this. So basically my problem I got xell to boot instantly no problems entered the CPU key said it was correct and then when I created to xebuild image and hit write nand always about half way through it would keep saying error writing bad block. So I kept reinstalling the nand x wires and it just kept happening so I wrote the nand and failed at least 5 times. Then I finally got to write the updflash.bin but here's where it gets weird it booted the first time but it just kept booting turning off booting turning off. Then like everytime I would hook the power supply in it would turn on then give me 0010 rrod. So it was a b**** rewriting the nand but I rewrote it back to stock hoping that would fix it but nope just instant 0010 rrod. I'm really stuck and don't know what else to do. I'm absolutely positive my soldering is good. This is a Jasper 16mb and I'm doing rgh 1.2. Please help.
Everytime the power supply is plugged in it just turns on automatically and gives me 3 rrod even when I turn it off it just keeps turning back on by itself..
Everytime the power supply is plugged in it just turns on automatically and gives me 3 rrod even when I turn it off it just keeps turning back on by itself..
Last edited: