What's new

Unsolved RGH 1.2 on Falcon: SMC Power mode editing to fix freezes and reboots?

  • Thread starter peppefender
  • Start date
  • Views 120
P

peppefender

Newbie
Messages
9
Reaction score
12
Hi guys!

After the Kronos, I made RGH 1.2 on a Falcon, too. This time, I used ACEv3 instead of Matrix chip.

After a couple of hours of tweaking with xsvf file, it actually boots fine. Unfortunately, just copying some files via FTP, the console sometimes freezes or even reboots.

I've found a couple of posts talking about SMC Power Mode editing. Even with RGH 1.2 I could try editing these parameters trying to fix this issues?

Thanks in advance for the reply!
 
S

Spitfire49

Newbie
Messages
7
Reaction score
3
Hi mate,

I recently did RGH my falcon too, and ran into the same issue.
I did edit the SMC file and the console kept freezing.

What I did to fix this was re-routing the wires with the exact same path that "TheWeekendModder" shows on his videos.
And since that, the console works perfectly, no freezes, nothing.

While your at it, I suggest you to change the thermal paste.
 
P

peppefender

Newbie
Messages
9
Reaction score
12
Hi mate,

I recently did RGH my falcon too, and ran into the same issue.
I did edit the SMC file and the console kept freezing.

What I did to fix this was re-routing the wires with the exact same path that "TheWeekendModder" shows on his videos.
And since that, the console works perfectly, no freezes, nothing.

While your at it, I suggest you to change the thermal paste.
Finally I discovered why I had freezes: it seems that hdd drive wasn't working correctly anymore. So I changed it and freezes disappeared.

Thanks!

BTW, how can I sign the post as "solved"?
 
Top Bottom